✦ LIBER ✦

Catalytic reforming with simultaneous production of high-octane fuel and aromatic hydrocarbons

✍ Scribed by A. P. Fedorov; G. N. Maslyanskii; V. V. Shipikin; N. P. Mel'nikova; E. A. Shkuratova; A. P. Dorokhov

Publisher: Springer US
Year: 1972
Tongue: English
Weight: 277 KB
Volume: 8
Category: Article
ISSN: 0009-3092
DOI: 10.1007/bf00713902

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Production of high-octane car fuels by u

Production of high-octane car fuels by utilization of isoparaffin components and gasolines obtained by catalytic reforming

✍ N. R. Bursian; G. N. Maslyanskii; N. K. Volnukhina; E. I. Zabryanskii 📂 Article 📅 1965 🏛 Springer US 🌐 English ⚖ 323 KB

Production of COx-free hydrogen for fuel

Production of COx-free hydrogen for fuel cells via step-wise hydrocarbon reforming and catalytic dehydrogenation of ammonia

✍ T.V Choudhary; C Sivadinarayana; D.W Goodman 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 392 KB

The stringent CO x -free hydrogen requirement for the current low temperature fuel cells has motivated the development of CO x -free hydrogen production alternatives to the conventional hydrogen production technologies. Recently, our group has investigated step-wise reforming of hydrocarbons and cat

Methanol steam reforming in supported Pd

Methanol steam reforming in supported Pd membrane reactor The supported Pd membrane is promising for the production of high-purity hydrogen from catalytic steam reforming of methanol. At the 35°C reaction temperature, the catalyst activity and stability are promoted by increasing the alumina content. Here a compact doublejacketed reactor has generated high-purity hydrogen directly from steam reforming of methanol, with no need for external purification and a much higher recovery yield.

📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 110 KB

environments was investigated. The corrosion rate is higher under 'outlet' conditions at 700°C compared to standard conditions at 650°C and 'inlet' conditions at 600°C. The corrosion potential increases with time when a protective corrosion layer is formed. Eventually it reaches a more positive pote