Catalytic isobutane dehydrogenation in a dense silica membrane reactor
โ Scribed by T. Ioannides; G.R. Gavalas
- Publisher
- Elsevier Science
- Year
- 1993
- Tongue
- English
- Weight
- 66 KB
- Volume
- 96
- Category
- Article
- ISSN
- 0926-860X
No coin nor oath required. For personal study only.
โฆ Synopsis
The dehydrogenation of isobutane on a commercial chromia-alumina catalyst was studied using a conventional and a membrane reactor. A series of differential runs were conducted varying the temperature and feed composition. Extensive loss of catalyst activity was observed within the first two or three hours on stream and this deactivation intensified with temperature and olefin content but was inhibited by hydrogen. The membrane reactor utilized a dense silica membrane prepared by chemical vapor deposition on a porous Vycor substrate. The membrane permeance was 0.3 cm3/cm2-min-atm and the hydrogen to hydrocarbon permeance ratio was 80-300. Integral runs were conducted to compare the performance of the membrane reactor with that of a conventional reactor. At all ~mperatures and space times the membrane reactor gave higher isobutene yield and selectivity, the difference increasing with the space time. The membrane exhibited stable permeance and permselectivity during several days of operation.
๐ SIMILAR VOLUMES
The dehydrogenation of isobutane to isobutene was conducted in a comparatively low-temperature range (from 623 to 723 K) using a hydrogen-permeable membrane reactor. An Al,O,-supported platinum catalyst exhibited high activity compared with a commercial Cr,Oa-Al,Oa catalyst in a conventional flow re
## Al3STRACT A high temperature catalytic membrane reactor, containing a Pt impregnated alumin a ceramic membrane tube in a shell-andtube configuration, was used to study dehydrogenation reactions. Experiments in this membrane reactor in the temperature range of 450-600ยฐC, with the ethane dehydrog