✦ LIBER ✦

Catalytic Hollow Fibre based Reactors for a Enhance H2 Production by Methanol Steam Reforming

✍ Scribed by García–García, F.R.; Yu, K.M.K.; Tsang, S.C.; Li, K.

Book ID: 123547802
Publisher: Elsevier
Year: 2012
Tongue: English
Weight: 324 KB
Volume: 44
Category: Article
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2012.08.354

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Integration of methanol steam reforming

Integration of methanol steam reforming and combustion in a microchannel reactor for H2 production: A CFD simulation study

✍ G. Arzamendi; P.M. Diéguez; M. Montes; M.A. Centeno; J.A. Odriozola; L.M. Gandía 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 633 KB

Experimental Study of a Membrane Assiste

Experimental Study of a Membrane Assisted Fluidized Bed Reactor For H2 Production by Steam Reforming of CH4

✍ C.S. Patil; M. Van Sint Annaland; J.A.M. Kuipers 📂 Article 📅 2006 🏛 Institution of Chemical Engineers 🌐 English ⚖ 404 KB

H2 production by low pressure methane st

H2 production by low pressure methane steam reforming in a Pd–Ag membrane reactor over a Ni-based catalyst: Experimental and modeling

✍ A. Iulianelli; G. Manzolini; M. De Falco; S. Campanari; T. Longo; S. Liguori; A. 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 855 KB

Nowadays, there is a growing interest towards pure hydrogen production for proton exchange membrane fuel cell applications. Methane steam reforming reaction is one of the most important industrial chemical processes for hydrogen production. This reaction is usually carried out in fixed bed reactors

Methanol steam reforming in supported Pd

Methanol steam reforming in supported Pd membrane reactor The supported Pd membrane is promising for the production of high-purity hydrogen from catalytic steam reforming of methanol. At the 35°C reaction temperature, the catalyst activity and stability are promoted by increasing the alumina content. Here a compact doublejacketed reactor has generated high-purity hydrogen directly from steam reforming of methanol, with no need for external purification and a much higher recovery yield.

📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 110 KB

environments was investigated. The corrosion rate is higher under 'outlet' conditions at 700°C compared to standard conditions at 650°C and 'inlet' conditions at 600°C. The corrosion potential increases with time when a protective corrosion layer is formed. Eventually it reaches a more positive pote