✦ LIBER ✦

Catalytic activities of non-noble metals for hydrogen generation from aqueous ammonia–borane at room temperature

✍ Scribed by Qiang Xu; Manish Chandra

Book ID: 108192236
Publisher: Elsevier Science
Year: 2006
Tongue: English
Weight: 779 KB
Volume: 163
Category: Article
ISSN: 0378-7753
DOI: 10.1016/j.jpowsour.2006.09.043

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Catalytic hydrolysis of hydrazine borane

Catalytic hydrolysis of hydrazine borane for chemical hydrogen storage: Highly efficient and fast hydrogen generation system at room temperature

✍ Senem Karahan; Mehmet Zahmakıran; Saim Özkar 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 828 KB

There has been rapidly growing interest for materials suitable to store hydrogen in solid state for transportation of hydrogen that requires materials with high volumetric and gravimetric storage capacity. B-N compounds such as ammonia-triborane, ammoniaborane and amine-borane adducts are well suite

Surfactant-Free Nonaqueous Synthesis of

Surfactant-Free Nonaqueous Synthesis of Plasmonic Molybdenum Oxide Nanosheets with Enhanced Catalytic Activity for Hydrogen Generation from Ammonia Borane under Visible Light

✍ Cheng, Hefeng; Kamegawa, Takashi; Mori, Kohsuke; Yamashita, Hiromi 📂 Article 📅 2014 🏛 John Wiley and Sons 🌐 English ⚖ 886 KB

Methanol steam reforming in supported Pd

Methanol steam reforming in supported Pd membrane reactor The supported Pd membrane is promising for the production of high-purity hydrogen from catalytic steam reforming of methanol. At the 35°C reaction temperature, the catalyst activity and stability are promoted by increasing the alumina content. Here a compact doublejacketed reactor has generated high-purity hydrogen directly from steam reforming of methanol, with no need for external purification and a much higher recovery yield.

📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 110 KB

environments was investigated. The corrosion rate is higher under 'outlet' conditions at 700°C compared to standard conditions at 650°C and 'inlet' conditions at 600°C. The corrosion potential increases with time when a protective corrosion layer is formed. Eventually it reaches a more positive pote