✦ LIBER ✦

Catalyst for membrane electrode assembly

Publisher: Elsevier Science
Year: 1999
Tongue: English
Weight: 275 KB
Volume: 2
Category: Article
ISSN: 1464-2859
DOI: 10.1016/s1464-2859(00)80108-x

No coin nor oath required. For personal study only.

✦ Synopsis

Power Corporation, USA Here a solid oxide fuel cell electrode is produced by a sintering process. An underlayer is applied to the electrolyte of a solid oxide fuel cell in the form of a slurry, and dried. An overlayer is applied to the underlayer, and dried. The dried under-and overlayers are then sintered to form a fuel electrode. The two layers comprise a combination of electrode metal and stabilised zirconia, with the overlayer comprising a greater percentage of electrode metal. The use of more stabilised zirconia in the underlayer provides good adhesion to the electrolyte, while the use of more electrode metal in the overlayer provides good electrical conductivity. The sintered electrodes exhibit favourable performance characteristics, including good porosity, adhesion, electrical conductivity and freedom from degradation.

📜 SIMILAR VOLUMES

Catalysts for membrane electrode assembl

Catalysts for membrane electrode assembly

📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 264 KB

can be tailored to match gas flow patterns and gradients. Further refinements can be achieved by varying the print pattern across the cell, and by using multiple layers to control both the depth and structure of the layers within the pattern. The advantages of this gas diffusion electrode are higher

Non-platinum cathode catalyst layer comp

Non-platinum cathode catalyst layer composition for single Membrane Electrode Assembly Proton Exchange Membrane Fuel Cell

✍ Tim S. Olson; Kate Chapman; Plamen Atanassov 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 487 KB

The performance of nano-structured templated non-platinum-based cathode electrocatalysts for proton exchange membrane fuel cells (PEMFC) was evaluated for different catalyst layer compositions. The effect of non-platinum catalyst, Nafion, and 35 wt% Teflon modified Vulcan XC-72 Carbon Blacks (XC-35)

Investigation of a Novel Catalyst Coated

Investigation of a Novel Catalyst Coated Membrane Method to Prepare Low-Platinum-Loading Membrane Electrode Assemblies for PEMFCs

✍ X. Leimin; L. Shijun; Y. Lijun; L. Zhenxing 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 307 KB

## Abstract In this work, a novel catalyst coated membrane (CCM) approach–a catalyst‐sprayed membrane under irradiation (CSMUI)–was developed to prepare MEAs for proton exchange membrane fuel cell (PEMFC) application. Catalyst ink was sprayed directly onto the membrane and an infrared light was use

Study on the membrane electrode assembly

Study on the membrane electrode assembly fabrication with carbon supported cobalt triethylenetetramine as cathode catalyst for proton exchange membrane fuel cell

✍ Tao Gan; Qi-Zhong Jiang; Hui-Juan Zhang; Wan-Li Wang; Xiao-Zhen Liao; Zi-Feng Ma 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 700 KB

Influence of anion ionomer content and s

Influence of anion ionomer content and silver cathode catalyst on the performance of alkaline membrane electrode assemblies (MEAs) for direct methanol fuel cells (DMFCs)

✍ Hideaki Bunazawa; Yohtaro Yamazaki 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 541 KB

Membrane electrode assembly

📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 321 KB