𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Carburization of iron using CO−H2gas mixture

✍ Scribed by Ho-Sun Hwang; Uoo-Chang Chung; Won-Sub Chung; Young-Rae Cho; Byong-Ho Jung; G. P. Martin

Publisher
TechnoPress
Year
2004
Tongue
English
Weight
335 KB
Volume
10
Category
Article
ISSN
1598-9623

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Iron carburization in CO-H2-He gases, Pa
Iron carburization in CO-H2-He gases, Part I: Experiment
✍ Zhe Wang; Richard A. Yetter 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 316 KB

## Abstract Carburization of iron was studied at atmospheric pressure over the temperature range 850°C to 1150°C in gaseous mixtures of CO, H~2~, and He. The resistance relaxation method was applied to measure the carburization rates. Experimental results show that for carburization in CO‐He mixtur

Iron carburization in CO-H2-He gases, Pa
Iron carburization in CO-H2-He gases, Part II: Numerical model
✍ Zhe Wang; Richard A. Yetter 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 387 KB

## Abstract A numerical model for the carburization of iron in CO‐H~2~‐He mixtures was developed and compared with experimental data over the temperature range of 850°C–1150°C, CO partial pressures from 1% to 12%, and H~2~ partial pressures from 5% to 99%. The reaction mechanism was established on

α-Fe layer formation during metal dustin
α-Fe layer formation during metal dusting of iron in CO-H2-H2O gas mixtures
✍ J. Zhang; A. Schneider; G. Inden 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 German ⚖ 513 KB

## Abstract The formation of an α‐Fe layer between cementite and graphite was observed and investigated during metal dusting of iron in CO‐H~2~‐H~2~O gas mixtures at both 600°C and 700°C. The condition to form this phenomenon is determined by the gas composition which depends on temperature. The ir