✦ LIBER ✦

Calculation of the strength of reactors with annular heat-transfer tubes

✍ Scribed by S. S. Oleshev; V. D. Medvedev

Publisher: Springer
Year: 1982
Tongue: English
Weight: 242 KB
Volume: 18
Category: Article
ISSN: 0009-2355
DOI: 10.1007/bf01156300

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Calculation of the strength of annular b

Calculation of the strength of annular bottoms and tube grids from the limiting loads

✍ O. S. Suvorova; V. A. Freitag; G. S. Grigorenko 📂 Article 📅 1977 🏛 Springer 🌐 English ⚖ 487 KB

Intensification of heat transfer in the

Intensification of heat transfer in the condensation of water vapor on horizontal tubes with annular grooves

✍ G. A. Dreitser; E. S. Levin; A. V. Mikhailov 📂 Article 📅 1988 🏛 Springer US 🌐 English ⚖ 473 KB

Convective heat transfer and pressure dr

Convective heat transfer and pressure drop of annular tubes with three different internal longitudinal fins

✍ Lin Tian; Qiuwang Wang; Gongnan Xie; Cunlu Zhao; Laiqin Luo 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 416 KB

## Abstract Pressure drop and heat transfer characteristics of air in three annular tubes with different internal longitudinal fins were investigated experimentally at uniform wall heat flux. The tested tubes have a double‐pipe structure with the inner blocked tube as an insertion. Three different

Branch standard for the strength calcula

Branch standard for the strength calculation of heat exchangers with twisted tubes and a rigid core

✍ O. S. Suvorova; V. A. Freitag 📂 Article 📅 1977 🏛 Springer 🌐 English ⚖ 175 KB

Intensification of heat transfer during

Intensification of heat transfer during vapor condensation on the outside surface of vertical tubes with annular swirl vanes

✍ G. A. Dreitser; S. G. Zakirov; Sh. K. Agzamov 📂 Article 📅 1984 🏛 Springer US 🌐 English ⚖ 327 KB

The numerical calculation of heat transf

The numerical calculation of heat transfer performance for annular flow of liquid nitrogen in a vertical annular channel

✍ Shufeng Sun; Yuyuan Wu; Rongyi Zhao 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 226 KB

According to a separated phase ¯ow model for vertical annular two-phase ¯ow in an annular channel, the liquid ®lm thickness, distributions of velocities and temperatures in the liquid layer are predicted in the range of heat ¯uxes: 6000±12000 W=m 2 , mass ¯ux: 500±1100 kg=m 2 s. The pressure drop al