✦ LIBER ✦

Calculating chemical concentrations during the initiation of crevice corrosion

✍ Scribed by Stephen P. White; Graham J. Weir; N.J. Laycock

Book ID: 117087564
Publisher: Elsevier Science
Year: 2000
Tongue: English
Weight: 320 KB
Volume: 42
Category: Article
ISSN: 0010-938X
DOI: 10.1016/s0010-938x(99)00097-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The thermodynamics of crevice corrosion

The thermodynamics of crevice corrosion initiation

✍ R.J. Brigham 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 193 KB

Crevice corrosion: calculation of the vo

Crevice corrosion: calculation of the voltage and current distribution along the crevice

✍ B. Vicentini; G. Taccani; D. Sinigaglia 📂 Article 📅 1971 🏛 John Wiley and Sons 🌐 German ⚖ 743 KB

Crevice corrosion initiation and the pot

Crevice corrosion initiation and the potential of zero charge

✍ R.J Brigham 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 361 KB

The variation of solution composition du

The variation of solution composition during the initiation of crevice corrosion on stainless steel

✍ Stephen E. Lott; Richard C. Alkire 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 341 KB

Oscillation of Potential and Current Dur

Oscillation of Potential and Current During the Initiation of Crevice Corrosion on Carbon Steel

✍ M. Wilmott 📂 Article 📅 1998 🏛 Springer 🌐 English ⚖ 103 KB

The role of electrolyte concentration on

The role of electrolyte concentration on crevice corrosion of pure nickel

✍ M.I. Abdulsalam 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 German ⚖ 182 KB

## Abstract In this work an artificial crevice electrode was used in conjunction with a fine microprobe assembly to measure the potential inside the crevice. Using this setup crevice corrosion of commercially pure nickel was investigated in sulfuric acid with concentrations: 0.5, 1 and 2N. The oute