✦ LIBER ✦

Cable sealing

Publisher: Elsevier Science
Year: 2002
Tongue: English
Weight: 143 KB
Volume: 2002
Category: Article
ISSN: 1350-4789
DOI: 10.1016/s1350-4789(02)80031-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Sealing power cable ducts

📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 255 KB

## Contents Static sealing 1 . New sealing process for space station . Sealing power cable ducts . Polysulphide compound gives a watertight seal . New high performance fluoroelastomers Dynamic sealing 2 . Braided packing solves extrusion problems . Gland packing seals from the Ukraine . Pusher sea

Cable seal

📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 135 KB

them is significantly small, it does not affect the reciprocation of the displacer. As the seal is provided so as not to be restricted axially and radially, the displacer is kept closely contacted with the inner peripheral surface of the cylinder even if the displacer shifts eccentrically.

Cable sealing for offshore conditions

📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 163 KB

## Thermiculite meets high temperature gasket challenge A US petrochemical company faced a problem when an asbestos rope gasket in a gas turbine application, involving temperatures of up to 632 °C and pressures of 0.33 bar, began to fail. However, Flexitailic came to the rescue with its new sealin

Cable connector seal

📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 134 KB

A metal edge seal ring is formed in a trench made up of a large number of short, connected legs arranged in a perpendicular fashion. Metal is deposited in the trench, and because the metal comprises many short segments, rather than several long, straight sections, the subsequent chemical-mechanical

Sealed cable connection

📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 134 KB

Cable-entry seal

📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 147 KB

## April 2011 Sealing Technology ## 15 the pipe connection work and quality of the connection by eliminating the need to form a flare on the pipe. The pipe joint consists of a flare joint body (1), a cap nut (2) and a stop ring (3). The rounded, pressure-contact sloped surface (32) of the stop