Bubble characteristics in a two-dimensional vertically vibro-fluidized bed
β Scribed by Tao Zhou; Hiroyuki Kage; Hongzhong Li
- Publisher
- Elsevier
- Year
- 2005
- Tongue
- English
- Weight
- 249 KB
- Volume
- 3
- Category
- Article
- ISSN
- 1672-2515
No coin nor oath required. For personal study only.
β¦ Synopsis
Measurement of bubble size and local average bubble rise velocity was carried out in a vertically sinusoidal vibro-fluidized bed. Glass beads of Geldart group B particles were fluidized at different gas velocities, while the bed was vibrated at different frequencies and amplitudes to study their effects on the bubble behavior. This is compared with the case of no vibration in a two-dimensional bed and it is concluded that with vibration the local average bubble size, d bav , decreases significantly, especially at minimum bubbling velocity. The average bubble size increases slightly with increasing vibration frequency and amplitude. The local average bubble rise velocity is higher than that with no vibration, though with increasing vibration frequency and amplitude, it does not change significantly.
π SIMILAR VOLUMES
## Abstract An investigation was carried out in a circulating fluidized bed to explore if rice husk could be fluidized without mixing it with any foreign solids. Experimental results indicate that bed crossβsection has an important influence on the fluidization characteristics of rice husk. Larger
Measurements of the entire pressure field around a two-dimensional bubble rising in an incipiently fluidized bed are reported. Above the center of pressure line, the field is Laplacian and reasonably well described by Davidson's theory. The pressure wake is closed. It extends for 12 bubble radii bel
Theory based on ideal fluid behavior by the particulate phase predicts that the particle movement caused by a bubble rising in a finite two-dimensional bed is primarily in the vertical direction with the top and bottom of the bed forcing horizontal movement. The boundaries of the bed have a compress