Bruchmechanische Untersuchungen an einer Schweißverbindung von 90 mm Dicke aus Almg 4,5 Mn bei Raumtemperatur und bei −196 °C
✍ Scribed by Dr.-Ing. L. Kopp; Dipl.-Ing. H. W. Lenz
- Publisher
- John Wiley and Sons
- Year
- 1986
- Tongue
- English
- Weight
- 793 KB
- Volume
- 17
- Category
- Article
- ISSN
- 0933-5137
No coin nor oath required. For personal study only.
✦ Synopsis
An einer nach dem MIG-Verfahren hergestellten 90 mm dicken Schweiherbindung aus A1 Mg 4,5 Mn wurden zur Beurteilung des Zahigkeitsverhaltens bei -196 "C neben den iiblichen Kerbsehlagbiegeversuchen umfangreiche metallographische und bruchmechanische Untersuchungen durchgefiihrt. Die gefundenen Ergebnisse zeigen deutlich, daL3 eine Zahigkeitsbeurteilung des vorliegenden Werkstoffes A1 Mg4,5 Mn mittels der Kerbschlagpriifung allein zu falschen Ergebnissen fuhrt. Der Werkstoff wird zu schlecht beurteilt. Die Schweiherbindung kann ohne Bedenken bei -196 "C eingesetzt werden.
Toughness Evaluation for a Thick Weld Joint of AlMg 4,5 Mn at -196 "C
To asses the toughness of a 90 mm thick MIG-weld joint of A1 Mg4.5 Mn fracture mechanics and charpy impact material parameters have been determined at 20 "C and -196 "C. Additional to the mechanical tests extensive metallographic and fractographic tests on specimens of the weld material and base material were done. The results of the fracture mechanics tests and the fracture analysis show, that now brittle fracture will occur at -196 "C. The further conclusions are, that charpy energy values are no meaningful basis for a toughness evaluation of such an aluminium weld joint. The joint can be used without restrictions at -196 "C.