Broadband Fabry-Perot resonator printed antennas using FSS superstrate with dissimilar size
✍ Scribed by Liu, Zhen Guo (author);Zhang, Wen Xun (author);Fu, Dao Lin (author);Gu, Ying Ying (author);Ge, Zhi Chen (author)
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 487 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
In this paper, the broadband Fabry‐Perot resonator antenna composed of single‐layer FSS superstrate with dissimilar size square patch fed by U‐slotted patch is proposed, which is validated by two cases of samples. It is demonstrated that the common bandwidth for (3 dB directivity‐drop and −10 dB returned loss of the Fabry‐Perot resonator antenna with the tapered FSS superstrate increases by 7.99% to 12.2% for two different cases, as compared to that of previously single layer FSS with similar size. At the same time the side‐lobe level of antenna can also be improved.The simulated and measured results are good agreement each other. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 1623–1627, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23456
📜 SIMILAR VOLUMES
## Abstract Fabry–Perot resonators with EBG or FSS cover are introduced to enhance the gain of printed antenna. Based on a systematic comparison study, two kinds of optimization designs are proposed for enhancing the gain and reducing the backward radiation. The validation of the simulated and expe