𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Broadband array using surface-mounted monopole concept

✍ Scribed by L. Desclos; J. M. Floc'h

Book ID
101268353
Publisher
John Wiley and Sons
Year
1998
Tongue
English
Weight
145 KB
Volume
19
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

After introducing a surface-mounted component antenna concept with a single element, the authors propose its application in an array form. The proposed structures allow more degrees of freedom for trimming the pattern since each element can be placed by sliding it onto the feeding lines. Se¨eral examples are shown with four or six elements at frequencies in the S-and X-bands.

📜 SIMILAR VOLUMES

Design of a V-shaped surface-mounted mon
Design of a V-shaped surface-mounted monopole array antenna for DCS/PCS operations
✍ Jean-Marie Floc'h; Hatem Rmili 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 997 KB

## Abstract In this paper, a surface‐mountable, reconfigurable monopole antenna was designed for array antenna operations in the DCS‐1800 and PCS‐1900 bands. First, the elementary structure was obtained by folding a metallic strip into a V‐shape, and then soldered to a 50‐Ω microstrip feed line pri

Low-profile printed antennas using a sur
Low-profile printed antennas using a surface-mounted component concept
✍ J. M. Floc'h; L. Desclos; G. Poilasne 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 473 KB

The direct integration of an antenna on a system board of antennas is a promising technique for telecommunication network systems. This concept extends from pre¨ious studies on surface-mounted antennas and printed dipole excitation, allowing lighter manufacturing and trimming phases than classical m