Bond strength of deformed bars in large reinforced concrete members cast with industrial self-consolidating concrete mixture
✍ Scribed by A.A.A. Hassan; K.M.A. Hossain; M. Lachemi
- Publisher
- Elsevier Science
- Year
- 2010
- Tongue
- English
- Weight
- 752 KB
- Volume
- 24
- Category
- Article
- ISSN
- 0950-0618
No coin nor oath required. For personal study only.
✦ Synopsis
The bond strength of reinforcing bars embedded in full-scale heavily reinforced concrete sections made with industrial self-consolidating concrete (SCC) was investigated and compared with that of normal concrete (NC). The flowability of SCC mix through the dense reinforcement was visually monitored from a transparent formwork. The bond stress was tested for bars located at three different heights (150 mm, 510 mm, and 870 mm from the bottom of the pullout specimens) and at different tested ages (1, 3, 7, 14, and 28 days). The bond stress-free end slip relationship, the top bar effect and the effect of age on bond stress was investigated in both SCC and NC pullout specimens. Bond stresses predicted based on some major codes were compared with those obtained from experiments. The results indicated that casting SCC was much faster and easier and could be done with less labor effort and no concrete blockage among the heavy reinforcements compared to NC. The results also indicated that the bond stress was slightly higher in the SCC pullout specimen compared to the NC pullout specimen. The difference was more pronounced in the top bars and at 28 days of testing.