Biomass logistics as a determinant of second-generation biofuel facility scale, location and technology selection
✍ Scribed by James D. Stephen; Warren E. Mabee; Jack N. Saddler
- Publisher
- Wiley (John Wiley & Sons)
- Year
- 2010
- Tongue
- English
- Weight
- 667 KB
- Volume
- 4
- Category
- Article
- ISSN
- 1932-104X
- DOI
- 10.1002/bbb.239
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Feedstock logistics, as dictated by biomass physical properties, location, and distribution, as well as transportation infrastructure, were shown to be a primary determinant of the scale, location, and technology selection of any future biorefineries. The maximum capacity of both biochemical‐ and thermochemical‐based second‐generation biofuel facilities was established based on feedstock logistics including delivery mode (road, rail, or ship), maximum number of deliveries by mode, feedstock type (whole logs, chips, pellets, or bio‐oil), and biofuel yield from those feedstocks. The world's largest ethanol plant, pulp mill, coal‐based power plant, and oil refinery were used to approximate maximum plant size for different technologies, and to set an upper limit on the number of deliveries logistically possible for each transport mode. It was apparent that thermochemical conversion to transportation biofuels was favored for large, multimodal coastal facilities that are able to receive imported biomass in the form of feedstock intermediates, such as pellets and bio‐oil (maximum capacities of 2844 and 6001 million liters gasoline equivalent (MLGE) respectively). Biochemically‐based conversion processes, primarily due to smaller economies of scale and the typical use of higher moisture content and undensified feedstocks, such as whole logs and chips, are better suited for smaller facilities (maximum 1405 and 1542 MLGE, respectively) that rely on local feedstocks delivered by truck and/or rail. It was also apparent that optimization of the feedstock‐intermediate‐product chain, including biomass densification for transportation and high conversion yield, is essential if the scale of the any second‐generation biofuels facility is to be maximized. Copyright © 2010 Society of Chemical Industry and John Wiley & Sons, Ltd