The automatic adsorption apparatus has been developed to measure the individual adsorption isotherms of constituent vapor from binary mixed vapor. The present adsorption apparatus consists of a combination of gravimetry and volumetry. The weight increase due to gas adsorption was determined by the m
Binary vapor adsorption by activated carbon
β Scribed by P.J. Reucroft; P.B. Rao; G.B. Freeman
- Publisher
- Elsevier Science
- Year
- 1983
- Tongue
- English
- Weight
- 454 KB
- Volume
- 21
- Category
- Article
- ISSN
- 0008-6223
No coin nor oath required. For personal study only.
β¦ Synopsis
The adsorption of binary vapor mixtures has been investigated on BPL grade activated carbon. Vapor mixtures include CNCIIHIO. HCN/HzO and HCNICNCI. Preadsorption of one vapor generally lowers the adsorption of the second vapor below its single vapor isotherm value. Adsorption of CNCI after pre-adsorbing HCN is greater than the adsorption of HCN after pre-adsorbing CNCI. correlating with the higher affinity coefficient observed for CNCl. The adsorption of Hz0 vapor is reduced to very low levels by pre-adsorbing HCN or CNCI.
π SIMILAR VOLUMES
A number of studies have been reported in the literature related to the water vapor adsorption mechanism on by Calgon Carbon Corporation. The equilibrium carbonaceous materials and the influence of pore adsorption data are plotted in Figure 1, where the open structure on adsorption capacity. Often
We use a selection of wood-based and coconut-based activated carbons to investigate the factors controlling the removal of the hepatotoxin microcystin-LR (m-LR) from aqueous solutions. The wood carbons contain both micropores and mesopores. The coconut carbons contain micropores only. Confirming pre
The adsorption isotherms of the binary n-alkane mixtures n-hexane/n-octane, n-octane/n-tetradecane, and n-hexane/ n-tetradecane on the activated carbon TA 95 are measured at 298 K and described with mathematical functions. About 40 experimental values of the adsorption excess of the ternary mixture