𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Binary and ternary particulated composites: UHMWPE/CACO3/HDPE

✍ Scribed by J. Suwanprateeb

Publisher
John Wiley and Sons
Year
2000
Tongue
English
Weight
364 KB
Volume
75
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

✦ Synopsis

A study of the influence of employing ultrahigh molecular weight polyethylene (UHMWPE) on the toughness of CaCO 3 /high-density polyethylene (HDPE) composites was carried out. Binary and ternary HDPE-based composites with calcium carbonate in the range of 0 -40% and UHMWPE in the range of 0 -50% were produced by twin-screw extrusion followed by compression molding. From tensile and impact tests, it was found that increasing calcium carbonate content increased tensile modulus, but decreased tensile strength, strain at break, and impact resistance. The addition of UHMWPE helped to increase the strain at break and impact resistance of composites moderately without decreasing modulus or strength. The degree of toughening was found to increase with increasing UHMWPE content, but to decrease as the filler volume fraction was increased.

πŸ“œ SIMILAR VOLUMES

Binary and ternary particulate composite
Binary and ternary particulate composites. I. Viscoelastic behavior
✍ N. D. Alberola; F. Fernagut; P. Mele πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 274 KB πŸ‘ 1 views

Dynamic mechanical behaviors of binary and ternary particulate composites are investigated to test for the influence of the nature of a polymeric adduct, i.e., maleated styrene ethylene-co-butylene styrene (SEBS) or styrene-co-methacrylic acid (SAMA) copolymers, at the polystyrene (PS)/glass-beads i

Study of thermophysical and mechanical p
Study of thermophysical and mechanical properties of particulate composite polyethylene-CaCO3
✍ Ε tefan Barta; Jozef Bielek; Peter DieΕ‘ka πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 124 KB πŸ‘ 2 views

Starting from the formulae for effective parameters of the particulate composite derived within the average field approximation, the formula for the percolation threshold is derived. The maximum value of the percolation threshold is 1 3 in the case of the isotropic granules of globular shape. Furthe

Binary and ternary particulate composite
Binary and ternary particulate composites. II. Tensile behavior over a wide range of strain rates
✍ N. D. Alberola; Y. Germain; P. Mele πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 192 KB πŸ‘ 2 views

Tensile properties of both a binary material, i.e., polystyrene (PS) reinforced by 15 vol % of glass beads, and ternary composites, i.e., showing either a maleated styrene/ethylene-co-butylene/styrene copolymer or a styrene-co-methacrylic acid copolymer (SAMA) adduct at the PS/glass-beads interface,

Brittle-Ductile Transition and Toughenin
Brittle-Ductile Transition and Toughening Mechanism in POM/TPU/CaCO3 Ternary Composites
✍ Xiaoling Gao; Cheng Qu; Qin Zhang; Ya Peng; Qiang Fu πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 531 KB

## Abstract Summary: Polyoxymethylene (POM)/elastomer/filler ternary composites were prepared, in which thermoplastic polyurethane(TPU) and an inorganic filler, CaCO~3~, were used to achieve balanced mechanical properties of POM. A two‐step processing method, in which the elastomer and the filler w