Back-mixing of the continuous phase in bubble columns
β Scribed by Marco Millies; Dieter Mewes
- Publisher
- Elsevier Science
- Year
- 1995
- Tongue
- English
- Weight
- 618 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0009-2509
No coin nor oath required. For personal study only.
β¦ Synopsis
Most authors publishing numerical calculations for the flow field claim that scientific progress on liquid mixing in bubble columns must be based on the fluid dynamics. In a previous paper (Millies, M. and Mewes, D., 1995, Calculation of circulating flows in bubble columns. Chem. Engng Sci. 50, 2093-2106) a calculation method was presented, which allows the prediction of the flow field including several consecutive circulation cells. The conclusions for liquid mixing are drawn in the present paper. The main transport resistance of mixing of liquid phase is located between the circulation cells, a region which was completely neglected up to now. A structured model and even the one-dimensional dispersion model may be obtained from simplifying the transport equation of tracer under certain assumptions. Thus, the coefficients of the structured model and the one-dimensional dispersion model are obtained as results of the numerical calculation. Even though the stirred tank model appears convincing on first view, it is shown to fail as a link between the fluid dynamics and the liquid mixing.
π SIMILAR VOLUMES
Gas hold-up and liquid phase axial dispersion coefficient have been measured in water filled bubble columns of 5.08, 14.0 and 29sOcm dia. as a function of the superficial gas velocity. From the gas hold-up measurements the following relationship between the relative velocity between gas and liquid,
An expaimental study has been aimed at Linking the extent of axial mixing m gas and liquid phas~ m tall bubble coltmm reactors with the respective bubbling regimes (homogeneous, tr~msition, hctcrogeneous) Β’ncotmtered in such reactors and with correnpondhag macro-scale flow patterns of b~h phases. Th
The conventional two-bubble-class model for bubble column reactors has been modified to account for interactions between the two bubble classes. It is shown that the modified model is more consistent with the observed residence time distribution in the gas phase than the conventional model. The resu
Bubble column reactors are widely used in the fields of petrochemical, biochemical, and chemical engineering processes. They are comparable to other multiphase reactors because of their simplicity, low operating costs, and higher heat and mass transfer coefficients between phases. Since a continuous