𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Average power-handling capability of microstrip lines

✍ Scribed by Bahl, I.J.; Gupta, K.C.

Book ID
114445929
Publisher
Institution of Electrical Engineers
Year
1979
Weight
458 KB
Volume
3
Category
Article
ISSN
0308-6976

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Average power handling capability of mul
Average power handling capability of multilayer microstrip lines
✍ Inder J. Bahl πŸ“‚ Article πŸ“… 2001 πŸ› John Wiley and Sons 🌐 English βš– 280 KB

This article describes the average power handling capability APHC of multilayer microstrip lines, including the effect of mismatch at the terminations. The data presented herein are validated by considering an example of a 12-W monolithic microwave integrated circuit power amplifier fabricated using

Average power handling capability of thi
Average power handling capability of thin-film microstrip line under dc-bias conditions
✍ Hung-Wei Wu; Min-Hang Weng πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 681 KB

## Abstract Average power handling capability (APHC) of the thin‐film microstrip line (TFML) under dc‐bias conditions (<1 V) is proposed for the first time. The TFMLs with a 20‐μm‐thick polyimide thin films are fabricated on a low‐resistivity silicon substrate (ρ ≀ 10 Ξ© cm). Losses and APHC are ext

Frequency-dependent maximum average powe
Frequency-dependent maximum average power-handling capabilities of single and edge-coupled microstrip lines on low-temperature co-fired ceramic (LTCC) substrates
✍ Wen-Yan Yin; Xiaoting Dong; Y. B. Gan πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 English βš– 523 KB

The frequency-dependent maximum average power-handling capabilities (APHCs) of single and edge-coupled microstrip lines (MLs) on low-temperature co-fired ceramic (LTCC) substrates are investigated in this article. Although LTCCs have excellent high-frequency performance, the thermal conductivity is