𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Atomic force microscopy study of rubbed polyimide films

✍ Scribed by C. L. H. Devlin; S. D. Glab; S. Chiang; T. P. Russell


Publisher
John Wiley and Sons
Year
2001
Tongue
English
Weight
424 KB
Volume
80
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Atomic force microscopy images of ion-im
✍ Xinglong Xu; M. R. Coleman πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 430 KB πŸ‘ 1 views

The surface structure and morphology of ion-beam irradiated 6FDA-pMDA films were investigated using atomic force microscopy (AFM). A beam of 140 keV N / ions with a low current density was used in this work. Three irradiation fluences (2 1 10 14 /cm 2 , 1 1 10 15 /cm 2 , and 5 1 10 15 /cm 2 ) were c

Study of Polycrystalline and Amorphous L
✍ Pleschinger, A.; Lutz, J.; Kuchar, F.; Noll, H.; Pippan, M. πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 181 KB πŸ‘ 2 views

The surface topography and structure of low-pressure chemical vapour-deposited silicon Ðlms grown on the thermal oxide of (100) silicon substrates have been investigated using atomic force microscopy. The measurements have been performed on undoped as-grown samples with deposition temperatures betwe

Analysis of poly(ethylene terephthalate)
✍ S. A. C. Gould; D. A. Schiraldi; M. L. Occelli πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 409 KB πŸ‘ 1 views

An atomic force microscope operating in a contact mode can provide 5-1 5-nm atomic-scale images of a poly(ethylene terephthalate) (PET ) film that allows the identification of what are believed to be phenyl groups and phenyl chains. Largescale, 5-1 5-mm images reveal the presence of raised surface f

Mechanical Characterization of Thin Film
✍ Malgorzata Kopycinska-MΓΌller; Andre Striegler; Bernd KΓΆhler; Klaus-JΓΌrgen Wolter πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 361 KB πŸ‘ 1 views

## Abstract The atomic force acoustic microscopy (AFAM) technique has been used to determine elastic properties of films with thicknesses decreasing from several hundreds of nanometers to several nanometers. It has been shown that metal films as thin as 50 nm can be characterized directly without t