Assessment of some factors influencing tool wear on the machining of glass fibre-reinforced plastics by coated cemented carbide tools
✍ Scribed by K. Palanikumar; J. Paulo Davim
- Publisher
- Elsevier Science
- Year
- 2009
- Tongue
- English
- Weight
- 874 KB
- Volume
- 209
- Category
- Article
- ISSN
- 0924-0136
No coin nor oath required. For personal study only.
✦ Synopsis
Glass fibre-reinforced plastics (GFRP) composite materials are used in many different engineering fields. The need for machining of GFRP composites has not been eliminated fully.
The tool wear reduction is an important aspect during machining. In the present work, an attempt has been made to assess the factors influencing tool wear on the machining of GFRP composites. Experimental design concept has been used for experimentation. The machining experiments are carried out on lathe using two levels of factors. The factors considered are cutting speed, fibre orientation angle, depth of cut and feed rate. A procedure has been developed to assess and optimize the chosen factors to attain minimum tool wear by incorporating (i) response table and effect graph; (ii) normal probability plot; (iii) interaction graphs; (iv) analysis of variance (ANOVA) technique. The results indicated that cutting speed is a factor, which has greater influence on tool flank wear, followed by feed rate. Also the determined optimal conditions really reduce the tool flank wear on the machining of GFRP composites within the ranges of parameters studied.