𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Assessment of Fuel-Cell-Based Passenger Cars

✍ Scribed by T. Grube; B. Höhlein; R. Menzer


Publisher
John Wiley and Sons
Year
2004
Tongue
English
Weight
279 KB
Volume
4
Category
Article
ISSN
1615-6846

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

Highly efficient energy conversion systems with fuel cells for vehicles, as well as for stationary and portable applications, are currently being discussed all over the world. Fuel cell technology is expected to help reduce primary energy demand and emissions of limited and climate‐relevant pollutants. The high flexibility of fuel cell systems with respect to energy carriers opens up possibilities of modifying the energy sector in the long term. Introducing new fuels based on low‐carbon, or in the long term carbon‐free, energy carriers can contribute to reducing greenhouse gas emissions as well as locally and regionally active atmospheric pollutants. The use of hydrogen as feed gas for fuel cells on the basis of it being a non‐fossil, renewable energy, leads to special benefits with respect to conserving resources and climate protection, but at present still represents a medium‐ to long‐term prospect. A major milestone on the road to market success for all energy conversion systems with fuel cells is the reduction of costs. The definition of the „appropriate” fuel represents a serious obstacle to the market introduction of fuel‐cell‐powered vehicles.

Presenting data from a well‐to‐wheel analysis of various vehicle fuel systems at FZJ this article aims to discuss the potential benefits of future vehicle concepts with fuel cells in terms of primary energy use and greenhouse gas emissions. Results from a comparison of international studies on this subject will be used to identify relevant assumptions that lead to different answers in the evaluation process.


📜 SIMILAR VOLUMES


Consumption and Efficiency of a Passenge
✍ F. N. Büchi; G. Paganelli; P. Dietrich; D. Laurent; A. Tsukada; P. Varenne; A. D 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 540 KB

## Abstract The main factors for reducing the consumption of a vehicle are reduction of curb weight, air drag and increase in the drivetrain efficiency. Highly efficient drivetrains can be developed based on PEFC technology and curb weight may be limited by an innovative vehicle construction. In th

Life Cycle Assessment of a Molten Carbon
✍ P. Lunghi; R. Bove 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 258 KB 👁 1 views

## Abstract Fuel cells are considered to be ultra‐clean energy conversion systems because the pollutants emitted during their operating time are very low in concentration. For this reason, fuel cells can represent the answer to several environmental issues. What is important, however, is to careful

Assessment of the Application of Fuel Ce
✍ T. Grube; B. Höhlein; R. Menzer 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 401 KB

## Abstract Auxiliary power units (APUs) provide electrical power, with favourable efficiency and independent of the drive system, for a variety of mobile applications. The demand for electricity increases with increasing demand for convenience and safety functions, as well as for control and regul

Conduction-based modeling of the biofilm
✍ Andrew Kato Marcus; César I. Torres; Bruce E. Rittmann 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 320 KB 👁 2 views

The biofilm of a microbial fuel cell (MFC) experiences biofilm-related (growth and mass transport) and electrochemical (electron conduction and charger-transfer) processes. We developed a dynamic, one-dimensional, multi-species model for the biofilm in three steps. First, we formulated the biofilm o

Model-Based Analysis for the Control of
✍ M. D. Lukas; K. Y. Lee 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 437 KB 👁 1 views

## Abstract A first principles‐based non‐linear dynamic model for a Molten Carbonate Fuel Cell system is presented, analysed, and further developed for model‐based control applications. Transient validation results, using a laboratory‐scale test stack, are provided in support of the cell stack mode