✦ LIBER ✦

Articulating injection cannula and seal assembly

Publisher: Elsevier Science
Year: 2008
Tongue: English
Weight: 143 KB
Volume: 2008
Category: Article
ISSN: 1350-4789
DOI: 10.1016/s1350-4789(08)70613-5

No coin nor oath required. For personal study only.

✦ Synopsis

Piston ring

📜 SIMILAR VOLUMES

Seal assembly for a cannula

📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 195 KB

Applicant: Bridgestone Corporation, Japan A photocurable composition is described that is intended to improve reworkability as a sealing material, while securing an adequate hardness. It contains a photocurable liquid resin, a (meth) acrylate monomer and a photopolymerization initiator. The photocur

Seal and seal/boss assembly

📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 258 KB

basic composition of the raw material is composed of 16-28 wt% of NBR, serving as the rubber; 4-8 wt% of an aramid fibre, serving as the reinforcing fibre; 10-20 wt% of a needlelike dolomite, serving as the reinforcing fibre; 8-20 wt% of silica particles, serving as the filler; and the balance, an i

Seal and actuator assembly

📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 106 KB

Seal assembly and method for sealing

📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 107 KB

A mechanical seal is described that uses an elastomer bellows as the spring. This is to assist with providing an even face loading and improved resistance to clogging compared with typical coil spring designs.

Ring seal and retainer assembly

📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 250 KB

A cosmetics case having a dual sealing structure is designed to retain the volatile solvents in the cosmetic and hence ensure a longer life for the cosmetics. Both the foldable mirror and the lid, containing the make-up tools are sealed.

Cable gland assembly and seal

📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 87 KB