✦ LIBER ✦

Approximate method of determining the optimum cross section of microhannel heat sink

✍ Scribed by Omid Asgari; Mohammad Hassan Saidi

Book ID: 107624801
Publisher: Springer-Verlag
Year: 2009
Tongue: English
Weight: 818 KB
Volume: 23
Category: Article
ISSN: 1738-494X
DOI: 10.1007/s12206-009-1018-8

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Method of determining the optimum cross

Method of determining the optimum cross section of the feeder channel

✍ I. M. Sheinkop; S. S. Kutukov; A. A. Sokolov 📂 Article 📅 1964 🏛 Springer US 🌐 English ⚖ 119 KB

Optimum Thermal Analysis of a Heat Sink

Optimum Thermal Analysis of a Heat Sink with Various Fin Cross-Sections by Adjusting Fin Length and Cross-Section

✍ Kou, Hong-Sen; Lee, Ji-Jen; Chen, Chih-Wei 📂 Article 📅 2008 🏛 Taylor and Francis Group 🌐 English ⚖ 989 KB

Approximate Method of Determining the Cu

Approximate Method of Determining the Cutoff Frequencies of Waveguides of Arbitrary Cross Section (Correspondence)

✍ Chi, M.; Laura, P.A. 📂 Article 📅 1964 🏛 IEEE 🌐 English ⚖ 229 KB

Determining the optimum cross section of

Determining the optimum cross section of a venetian-blind separator

✍ Yu. L. Sorokin; I. N. Popchenkov; V. S. Burkat 📂 Article 📅 1966 🏛 Springer 🌐 English ⚖ 335 KB

Thermal Optimization of a Microchannel H

Thermal Optimization of a Microchannel Heat Sink With Trapezoidal Cross Section

✍ Husain, Afzal; Kim, Kwang-Yong 📂 Article 📅 2009 🏛 The American Society of Mechanical Engineers 🌐 English ⚖ 427 KB

Optimum thermal design of microchannel h

Optimum thermal design of microchannel heat sinks by the simulated annealing method

✍ Chih-Wei Chen; Ji-Jen Lee; Hong-Sen Kou 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 460 KB

By adopting the simulated annealing method, a three-dimensional numerical simulation is executed to minimize the thermal resistance of the microchannel heat sink corresponding to the optimum specification under the fixed flow power. The depths of the microchannel heat sink in this study are fixed at