✦ LIBER ✦

Application of the scanning electrochemical microscope to the examination of organic coatings on metallic substrates

✍ Scribed by A.C. Bastos; A.M. Simões; S. González; Y. González-García; R.M. Souto

Book ID: 113858432
Publisher: Elsevier Science
Year: 2005
Tongue: English
Weight: 263 KB
Volume: 53
Category: Article
ISSN: 0033-0655
DOI: 10.1016/j.porgcoat.2005.02.005

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Application of scanning electrochemical

Application of scanning electrochemical microscope in the study of corrosion of metals

✍ Lin Niu; Yuehua Yin; Weikuan Guo; Min Lu; Ruijie Qin; Shenhao Chen 📂 Article 📅 2009 🏛 Springer 🌐 English ⚖ 439 KB

In situ monitoring of electroactive spec

In situ monitoring of electroactive species by using the scanning electrochemical microscope. Application to the investigation of degradation processes at defective coated metals

✍ R.M. Souto; Y. González-Garcı́a; S. González 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 233 KB

Electrochemical Factors Controlling the

Electrochemical Factors Controlling the Patterning of Metals on SAM-Coated Substrates

✍ Nelson, Jeffrey B.; Schwartz, Daniel T. 📂 Article 📅 2007 🏛 American Chemical Society 🌐 English ⚖ 453 KB

Basic Aspects of Electrochemical Impedan

Basic Aspects of Electrochemical Impedance Application for the Life Prediction of Organic Coatings on Metals

✍ Kendig, M.; Scully, J. 📂 Article 📅 1990 🏛 NACE International 🌐 English ⚖ 605 KB

Application of infrared reflection spect

Application of infrared reflection spectroscopy for the analysis of hard coatings on metallic substrates

✍ P. Heger; G. Marx 📂 Article 📅 1999 🏛 Springer 🌐 English ⚖ 68 KB

Methods to Investigate the Adhesion of S

Methods to Investigate the Adhesion of Soft Nano-Coatings on Metal Substrates – Application to Polymer-Coated Stents

✍ François Lewis; Diego Mantovani 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 427 KB

## Abstract Soft coatings are widely used to tailor the surface chemistry of materials without altering their bulk properties. However, the strength of adhesion between the coating and the substrate must be high enough for long‐term applications. This has become a major challenge in the medical fie