✦ LIBER ✦

Application of the quadrature method to flexural vibration analysis of a geometrically nonlinear beam

✍ Scribed by Yusheng Feng; C. W. Bert

Publisher: Springer Netherlands
Year: 1992
Tongue: English
Weight: 266 KB
Volume: 3
Category: Article
ISSN: 0924-090X
DOI: 10.1007/bf00045468

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Determination of nonlinear stiffness wit

Determination of nonlinear stiffness with application to random vibration of geometrically nonlinear structures

✍ Alexander A Muravyov; Stephen A Rizzi 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 170 KB

The application of the simultaneous iter

The application of the simultaneous iteration method to flexural vibration problems

✍ V. Ramamurti; O. Mahrenholtz 📂 Article 📅 1974 🏛 Elsevier Science 🌐 English ⚖ 544 KB

ON THE FLEXURAL VIBRATION OF TIMOSHENKO

ON THE FLEXURAL VIBRATION OF TIMOSHENKO BEAMS, AND THE APPLICABILITY OF THE ANALYSIS TO A SANDWICH CONFIGURATION

✍ M.R. Maheri; R.D. Adams 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 241 KB

The viability of adapting the Timoshenko beam equations to a sandwich configuration is considered. These equations are utilised for modal analysis of solid as well as sandwich beams, including beams with a mass attached at the mid-span. Theoretical and experimental results regarding beam frequencies

Analysis of the flexural vibrations of a

Analysis of the flexural vibrations of a beam due to the motion of a line load

✍ A.P. Glinov 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 398 KB

The application of special matrix produc

The application of special matrix product to differential quadrature solution of geometrically nonlinear bending of orthotropic rectangular plates

✍ W. Chen; C. Shu; W. He; T. Zhong 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 209 KB

A Generalized Method For The Optimal Des

A Generalized Method For The Optimal Design Of Beams Under Flexural Vibration

✍ Y.S. Liao 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 288 KB

A generalized method is developed for the design of a cantilever of circular cross-section in flexural vibration. The dynamic rigidity of the overhang bar can be increased if the root portion of the bar is made of high elastic modulus material while the free end portion is composed of low density ma