✦ LIBER ✦

Application of response surface methodology for weld strength prediction in laser welding of polypropylene/clay nanocomposite

✍ Scribed by M. R. Nakhaei, N. B. Mostafa Arab, G. Naderi

Book ID: 120736447
Publisher: Iran Polymer and Petrochemical Institute
Year: 2013
Tongue: English
Weight: 836 KB
Volume: 22
Category: Article
ISSN: 1026-1265
DOI: 10.1007/s13726-013-0134-6

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Experimental study on optimization of CO

Experimental study on optimization of CO2laser welding parameters for polypropylene-clay nanocomposite welds

✍ M. R. Nakhaei, N. B. Mostafa Arab… 📂 Article 📅 2013 🏛 Springer-Verlag 🌐 English ⚖ 992 KB

Application of artificial neural network

Application of artificial neural network for predicting weld quality in laser transmission welding of thermoplastics

✍ Bappa Acherjee; Subrata Mondal; Bipan Tudu; Dipten Misra 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 570 KB

Application of Response Surface Methodol

Application of Response Surface Methodology in Describing the Residual Stress Distribution in CO2 Laser Welding of AISI304

✍ A. G. Olabi; K. Y. Benyounis; M. S. J. Hashmi 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 684 KB

Application of response surface methodol

Application of response surface methodology for predicting bend force during air bending process in interstitial free steel sheet

✍ R. Narayanasamy; P. Padmanabhan 📂 Article 📅 2008 🏛 Springer 🌐 English ⚖ 500 KB

Structure-property investigations on a l

Structure-property investigations on a laser beam welded dissimilar joint of aluminium AA6056 and titanium Ti6Al4V for aeronautical applications Part I: Local gradients in microstructure, hardness and strength

✍ W.V. Vaidya; M. Horstmann; V. Ventzke; B. Petrovski; M. Koçak; R. Kocik; G. Temp 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 484 KB

## Abstract Sheets of AA6056 and Ti6Al4V were butt‐joined by inserting the Ti‐sheet into the profiled Al‐sheet and by melting the Al‐alloy alone using a split beam Nd:YAG laser. To study microstructural effects on properties, the Al‐alloy was used in two tempers; T4 followed by post weld heat treat