✦ LIBER ✦

Application of dihedral angle measurements to the microstructure of cemented carbides WC-Co

✍ Scribed by J. Gurland

Publisher: Elsevier Science
Year: 1977
Weight: 478 KB
Volume: 10
Category: Article
ISSN: 0026-0800
DOI: 10.1016/0026-0800(77)90023-4

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microstructure Evolution in the Cemented

Microstructure Evolution in the Cemented Carbides WC-Co I. Effect of the C/W Ratio on the Morphology and Defects of the WC Grains

✍ Wang, Y. ;Heusch, M. ;Lay, S. ;Allibert, C.H. 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 648 KB

The morphology and the interface features of WC grains are examined by SEM and TEM in cemented carbides WC-8 wt% Co. Three compositions --the mixture {WC þ Co binder} and the mixtures with graphite or h --are studied after treatments at 1200 and 1450 C. The effect of the C content is observed both o

Microstructure Evolution in the Cemented

Microstructure Evolution in the Cemented Carbides WC-Co II. Cumulated Effects of Cr Additions and of the C/W Ratio on the Crystal Features of the WC Grains

✍ Wang, Y. ;Pauty, E. ;Lay, S. ;Allibert, C.H. 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 318 KB 👁 2 views

Influence of notch radius and R-curve be

Influence of notch radius and R-curve behaviour on the fracture toughness evaluation of WC–Co cemented carbides

✍ Y. Torres; R. Bermejo; L. Llanes; M. Anglada 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 585 KB

In this work the apparent fracture toughness of different grades of WC-Co cemented carbides has been evaluated by means of the single edge V-notched beam (SEVNB) method. The results are analysed, as a function of both the binder mean free path and the maximum steady-state crack shielding value, foll

Anodic polarization of cemented carbides

Anodic polarization of cemented carbides of the type [(WC,M): M = Fe, Ni or Co] in sulphuric acid solution

✍ Henryk Scholl; Bożenna Hofman; Adam Rauscher 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 615 KB

The electrodes prepared from the sintered tungsten carbide (WC) containing 10 vol.% of nickel or cobalt or iron, with Vickers hardness > 1200 kg mm-\*, were anodically polarized in 5 x 10-r mol dm-r aqueous solution of sulphuric acid. Material from the electrodes was electrochemically studied after

Anodic dissolution of cemented carbides

Anodic dissolution of cemented carbides of the type [(WC, M); M  Co, Ni OR Fe] in sulphuric acid solution. Electrochemical impedance spectroscopy

✍ Henryk Scholl; Bożenna Hofman; Janusz Kupis; Krzysztof Polański 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 489 KB

Stationary electrodes prepared from the sintered tungsten carbide (WC, M) containing 10 ~01% of M = Co, Ni or Fe binder, with Vickers hardness > 1200 kg mm-', have been investigated in 0.5 M H,SO, using the Scanning Electron Microscopy (SEM) and the Electrochemical Impedance Spectroscopy (EIS) metho

Applicability of the critical strain fra

Applicability of the critical strain fracture criterion to WC-Co hard metals

✍ R. Godse; J. Gurland 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 409 KB