✦ LIBER ✦

Antimony-induced embrittlement in welding heat-affected zones in a Cr–Mo low-alloy steel

✍ Scribed by Zheng, L.; Song, S.-H.

Book ID: 120422150
Publisher: Taylor and Francis Group
Year: 2013
Tongue: English
Weight: 252 KB
Volume: 93
Category: Article
ISSN: 0950-0839
DOI: 10.1080/09500839.2013.793459

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Grain boundary segregation of antimony i

Grain boundary segregation of antimony in heat affected zones during welding thermal cycles for a Cr–Mo low alloysteel

✍ Zheng, L.; Song, S.-H.; Yuan, Z.-X. 📂 Article 📅 2013 🏛 Elsevier Science 🌐 English ⚖ 319 KB

Numerical prediction of the microstructu

Numerical prediction of the microstructure of weld heat affected zone (HAZ) in SMAW weld deposits on Cr‐Mo‐V steel

✍ Masur, Z; Urquiza, G; Salazar, O; González, G 📂 Article 📅 2002 🏛 Woodhead Publishing 🌐 English ⚖ 562 KB

Three-dimensional monte carlo simulation

Three-dimensional monte carlo simulation of grain growth in the heat-affected zone of a 2.25Cr-1Mo steel weld

✍ S. Sista; Z. Yang; T. Debroy 📂 Article 📅 2000 🏛 The Minerals, Metals & Materials Society 🌐 English ⚖ 867 KB

Evolution Of Precipitate Structure in th

Evolution Of Precipitate Structure in the heat-affected zone of a 9 wt. % Cr Martensitic Steel during welding and post-weld heat treatment

✍ Univ.-Prof. Dr. Peter Mayr, Dr. Ivan Holzer… 📂 Article 📅 2011 🏛 Springer-Verlag 🌐 English ⚖ 983 KB

Stress-induced non-equilibrium grain bou

Stress-induced non-equilibrium grain boundary segregation of phosphorus in a Cr–Mo low alloy steel

✍ S.-H. Song; J. Wu; D.-Y. Wang; L.-Q. Weng; L. Zheng 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 213 KB

Grain boundary segregation of phosphorus under a 40 MPa tensile stress at 520 • C in a 0.025 wt.% P-doped 2.25Cr1Mo steel, which has already been thermally equilibrated, is examined using Auger electron spectroscopy. The segregation of phosphorus during stress-ageing has a non-equilibrium characteri

A metallographic technique for detecting

A metallographic technique for detecting martensite-austenite constituents in the weld heat-affected zone of a micro-alloyed steel

✍ R.M. Alé; J.M.A. Rebello; J. Charlier 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 921 KB