Antibacterial effect and cytotoxicity of Ag-doped functionally graded hydroxyapatite coatings
✍ Scribed by Xiao Bai; Stefan Sandukas; Mark Appleford; Joo L. Ong; Afsaneh Rabiei
- Book ID
- 102876421
- Publisher
- John Wiley and Sons
- Year
- 2011
- Tongue
- English
- Weight
- 949 KB
- Volume
- 100B
- Category
- Article
- ISSN
- 1552-4973
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Functionally graded hydroxyapatite coatings (FGHA) doped with 1, 3, and 6.5 wt % silver (Ag) have been deposited on Titanium using ion‐beam‐assisted deposition. Scanning transmission electron microscopy on coating cross sections confirmed the presence of FGHA coating with mostly amorphous layers at the top and mostly crystalline layers toward the coating interface as well as the existence of 10–50 nm Ag particles distributed throughout the thickness of the coatings. Calcium release in phosphate buffered saline solution showed a high release rate of Ca at the beginning of the test, and a gradual decrease in release rate thereafter to a minimum level until day 7. Similarly, the release rate of Ag in ultra pure water was initially high in the first 4 h and then gradually decreased over a 7 days period. Antibacterial tests have shown a reduction in the viability of S. aureus in Ag‐doped coatings particularly in samples with higher Ag concentrations of 3 and 6.5 wt %. Cytotoxicity tests using an osteoblast cell line, on the other hand, have demonstrated that the samples with 6.5 wt % Ag have a negative effect on osteoblast cell response, proliferation, and apoptosis as well as a negative effect on protein and osteocalcin production. It is notable that the samples with 3 wt % Ag or less presented minimal cytotoxicity compared with control surfaces. Considering both the antibacterial and cytotoxicity effects, it is suggested that the 3 wt % of Ag in FGHA coatings can be favorable. © 2011 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 100B: 553–561, 2012.
📜 SIMILAR VOLUMES
## Abstract Silver‐doped functionally graded hydroxyapatite (Ag‐FGHA) coatings have been prepared on glass and titanium substrates by ion beam assisted deposition (IBAD) method with __in situ__ heat treatment, and the biological response and dissolution properties of the coatings have been examined
## Abstract Bioceramic coatings like hydroxyapatite (HA) have shown promising bioactive properties in load‐bearing implant applications. The aim of this work is to deposit functionally graded HA/Ti layers consisting of an underlying Ti bond coat, the alternating layer, and an HA top‐layer on Ti6Al4