✦ LIBER ✦

Antenna Modeling for Inductive RFID Applications Using the Partial Element Equivalent Circuit Method

✍ Scribed by Scholz, P.; Ackermann, W.; Weiland, T.; Reinhold, C.

Book ID: 114653970
Publisher: IEEE
Year: 2010
Tongue: English
Weight: 646 KB
Volume: 46
Category: Article
ISSN: 0018-9464
DOI: 10.1109/tmag.2010.2043824

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Frequency analysis of IC package inducta

Frequency analysis of IC package inductance by the partial element equivalent circuit (PEEC) method

✍ Katsuro Nakamata; Michiaki Nishimura 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 English ⚖ 623 KB

Guaranteed Passive Parameterized Model O

Guaranteed Passive Parameterized Model Order Reduction of the Partial Element Equivalent Circuit (PEEC) Method

✍ Ferranti, F.; Antonini, G.; Dhaene, T.; Knockaert, L. 📂 Article 📅 2010 🏛 IEEE 🌐 English ⚖ 926 KB

Equivalent Circuit Modeling of Induction

Equivalent Circuit Modeling of Induction Motors Considering Stray Load Loss and Harmonic Torques Using Finite Element Method

✍ Yamazaki, K.; Suzuki, A.; Ohto, M.; Takakura, T.; Nakagawa, S. 📂 Article 📅 2011 🏛 IEEE 🌐 English ⚖ 424 KB

Monte Carlo simulation of an radio frequ

Monte Carlo simulation of an radio frequency identification system with moving transponders using the partial element equivalent circuit method

✍ Lindgren, T.; Kvarnström, B.; Ekman, J. 📂 Article 📅 2010 🏛 The Institution of Engineering and Technology 🌐 English ⚖ 416 KB

Extraction of lumped-element equivalent-

Extraction of lumped-element equivalent-circuit models of microstrip discontinuities using the finite-difference time-domain method

✍ Nader Farahat; Wenhua Yu; Raj Mittra 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 481 KB 👁 1 views

## Abstract This Letter presents a method for extracting the lumped‐element equivalent‐circuit models of microstrip discontinuities by using the finite‐difference–time‐domain (FDTD) method. The cascading properties of the ABCD matrix are used to de‐embed the attachment lines, leading to the two‐por

Application of the Finite Element Method

Application of the Finite Element Method to Determine the Electrical Resistance, Inductance, Capacitance parameters for the Circuit Package Enviornment

✍ Olson, L. 📂 Article 📅 1982 🏛 IEEE 🌐 English ⚖ 820 KB