Wires of silver, gold, and copper and some silver-copper and silver-gold alloys were stretched at room temperature, -80°C and at the liquid air point. The change of resistivity was determined as well as the recovery of resistivity on warming from the low temperatures to room temperature. The silver-
Anomalous behaviour of AgPd alloys on plastic deformation
✍ Scribed by W.H Aarts; A.S Houston-MacMillan
- Publisher
- Elsevier Science
- Year
- 1957
- Weight
- 257 KB
- Volume
- 5
- Category
- Article
- ISSN
- 0001-6160
No coin nor oath required. For personal study only.
✦ Synopsis
An investigation was mede of the change in resistivity of Ag-Pd alloys when plastically deformed at the nitrogen point. For certain alloys a decrease of resistivity was found. For a 10 per cent deformation the greatest reduction in resistivity occurred for an alloy of 60 per cent Ag-40 per cent Pd. COMPORTEMENT ANORMAL DES ALLIAGES Ag-Pd A LA DEFORMATION PLASTIQUE Les auteurs ont Qtudie la variation de la resistivite d'alliages Ag-Pd deform& plestiquement It 1~ temperature de l'azote liquide. Pour certaina d'entre eux, ils ont observe une diminution de la resistivite. Pour une deformation plastique de loo?, le minimum de resistivite a ete obtenu pour l'alliage compose de 60% d'argent et 40% de paladium. ANOMALES VERHALTEN VON Ag-Pd-LEGIERUNGEN BE1 PLASTISCHER VERFORMUNG Es wurde die Anderung des elektrischen Widerstandes van Ag-Pd-Legierungen infolge plastischer Verformung bei der Temperatur des fliissigen Stickstoffs untersucht. Dabei wurde bei gewissen Legierungen eine Abnahme des Widerstands gefunden. Bei 10 Prosent Verformung trrtt die grijsste Widerstandsabhahme en einer Legierung mit 60 Atomprozent Ag und 40 Atomprozent Pd auf.
📜 SIMILAR VOLUMES
Extruded round bars from magnesium alloys ZM21, ZK30, ZE10 and ZEK100 with various grain sizes were tested in tension and compression. The effect of grain size on the deformation behaviour of the alloys was investigated through the Hall‐Petch relation. __In‐situ__ acoustic emission measurements were
## Abstract The cover shows Micrographs from longitudinal sections of extruded bars of ZEK100, extrusion direction horizontal. More information can be found in the paper by J. Bohlen et al. on page 422 in this issue.