𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Analytical considerations of flow boiling heat transfer in metal-foam filled tubes

✍ Scribed by Y. P. Du; C. Y. Zhao; Y. Tian; Z. G. Qu

Book ID
105925479
Publisher
Springer-Verlag
Year
2011
Tongue
English
Weight
640 KB
Volume
48
Category
Article
ISSN
1432-1181

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Numerical Modelling of Flow Boiling Heat
Numerical Modelling of Flow Boiling Heat Transfer in Horizontal Metal-Foam Tubes
✍ Wei Lu; Chang-Ying Zhao πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 371 KB πŸ‘ 2 views

## Abstract The flow boiling heat transfer performance in horizontal metal‐foam tubes is numerically investigated based on the flow pattern map retrieved from experimental investigations. The flow pattern and velocity profile are generally governed by vapour quality and mass flow rate of the fluid.

Experimental Analysis of Multiphase Flow
Experimental Analysis of Multiphase Flow in Metallic foam: Flow Laws, Heat Transfer and Convective Boiling
✍ F. Topin; J.-P. Bonnet; B. Madani; L. Tadrist πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 English βš– 906 KB

## Abstract The first part of this work deals with flow laws of gas, liquid and mixtures in metallic foam. This experimental work is based on the stationary pressure profile measurement in a channel filled with metallic foam of several grades or materials for several controlled flow rates. Several

The heat transfer heterogeneities of ben
The heat transfer heterogeneities of bends in flow boiling of hairpin tubes
✍ Meng Meng; Xiao-Feng Peng πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 1016 KB

## Abstract A series of visual experiments were conducted for liquid– vapor two‐phase flow in hairpin tubes, and it was observed that most of the nucleation sites were located at the outer tube wall of the bend. From the simulation, it was concluded that the uneven velocity distribution in the bend