✦ LIBER ✦

Analysis of waveform distortions due to instability of recording and playback speeds

✍ Scribed by N. A. Rubichev

Book ID: 104956541
Publisher: Springer US
Year: 1977
Tongue: English
Weight: 343 KB
Volume: 20
Category: Article
ISSN: 0543-1972
DOI: 10.1007/bf00824650

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Waveform Distortions Due to Second-Order

Waveform Distortions Due to Second-Order Dispersion and Dispersion Mismatches in a Temporal Pulse-Shaping System

✍ Hao Chi; Jianping Yao 📂 Article 📅 2007 🏛 Optical Society of America 🌐 English ⚖ 470 KB

Analysis of the error in measurement of

Analysis of the error in measurement of ultrasound speed in tissue due to waveform deformation by frequency-dependent attenuation

✍ M Ragozzino 📂 Article 📅 1981 🏛 Elsevier Science 🌐 English ⚖ 399 KB

Analysis and Measurement of Signal Disto

Analysis and Measurement of Signal Distortion due to ESD Protection Circuits

✍ Jung-Hoon Chun; Murmann, B. 📂 Article 📅 2006 🏛 IEEE 🌐 English ⚖ 445 KB

Analysis of riverbank instability due to

Analysis of riverbank instability due to toe scour and lateral erosion

✍ Colin R. Thorne; Steven R. Abt 📂 Article 📅 1993 🏛 John Wiley and Sons 🌐 English ⚖ 495 KB

Analysis of instability in a critical di

Analysis of instability in a critical dimension bar due to focus and exposure

✍ Yang-Kuao Kuo; Chuen-Guang Chao; Chi-Yuan Lin 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 692 KB

Systematic analysis of the correlation b

Systematic analysis of the correlation between part geometry and distortion due to heat treatment

✍ C. Andersch; M. Ehlers; F. Hoffmann; H.-W. Zoch 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 336 KB

Part distortion occurring during hardening combined with narrow tolerances often requires post heat treatment machining. Since corrective machining is expensive, distortion must be kept as low as possible. The current work demonstrates the relevance of the part geometry for distortion. First of all,