𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Analysis of water trees in power cable polymeric insulation

✍ Scribed by M. Shuvalov; M. Mavrin; V. Ovsienko; A. Romashkin


Publisher
John Wiley and Sons
Year
2003
Tongue
English
Weight
409 KB
Volume
88
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


The conduction characteristics of electr
✍ Ansheng Xie; Xiaoquan Zheng; Shengtao Li; George Chen 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 212 KB 👁 1 views

## Abstract Depending on the morphology of the material and applied voltage frequency, three kinds of electrical trees can exist in cross‐linked polyethylene (XLPE) cable insulation, which are conducting, non‐conducting, and mixed trees with different growth mechanisms. It is suggested that when th

Thermal modelling and analysis of high-v
✍ Faruk Aras; Yunus Biçen 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 834 KB

## Abstract This article presents a simple thermal model for transient analysis of high‐voltage underground power cables based on proper ladder diagram at MATLAB–Simulink software under various operating conditions for engineering students. Available commercial programs created with commercial worr

FEM modelling of faults occurred in buri
✍ D. Klimenta; V. Kuč; V. Raičević; J. Radosavljević; M. Jevtić; D. Tasić 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 812 KB

## Abstract An engineering approach to numerical modelling of power cable heating due to a line‐to‐earth short‐circuit caused by previous mechanical damages of a cable sheath and insulation is proposed in this paper. Nonlinearity of the finite element model is based on the soil thermal conductivity

Analysis model of leakage current in a l
✍ Hirohito Funato; Masashi Bandou; Kenzo Kamiyama 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 224 KB

## Abstract Each time switching occurs, a PWM inverter produces high‐frequency leakage currents flowing through stray capacitors. Since the inverter for a trash conveyance crane is installed far away from the motor, the shield power cables between them become long, and leakage currents pass through