✦ LIBER ✦

ANALYSIS OF THREE-DIMENSIONAL UPSETTING PROCESS BY THE RIGID-PLASTIC REPRODUCING KERNEL PARTICLE METHOD

✍ Scribed by Y.H. Liu; J. Chen; S. Yu; X.W. Chen

Book ID: 117696297
Publisher: Elsevier Science
Year: 2006
Tongue: English
Weight: 642 KB
Volume: 19
Category: Article
ISSN: 1006-7191
DOI: 10.1016/s1006-7191(06)62075-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

On background Cells during the Analysis

On background Cells during the Analysis of Bulk Forming Processes by the Reproducing Kernel Particle Method

✍ Shangwu Xiong; J. M. C. Rodrigues; P. A. F. Martins 📂 Article 📅 2006 🏛 Springer 🌐 English ⚖ 644 KB

Steady and non-steady state analysis of

Steady and non-steady state analysis of bulk forming processes by the reproducing kernel particle method

✍ Shangwu Xiong; C.S. Li; J.M.C. Rodrigues; P.A.F. Martins 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 587 KB

Simulation of vertical-horizontal rollin

Simulation of vertical-horizontal rolling process during width reduction by full three-dimensional rigid-plastic finite element method

✍ S. Xiong; X. Liu; G. Wang; W. Zhang 📂 Article 📅 1997 🏛 Springer US 🌐 English ⚖ 526 KB

Analysis of non-steady state slab edging

Analysis of non-steady state slab edging in roughing trains by a three-dimensional rigid-plastic finite element method

✍ Shangwu Xiong; Xianghua Liu; Guodong Wang 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 306 KB

Numerical simulation of the non-steady state deformation behavior around the head and tail ends during slab edging is carried out by the full three-dimensional rigid-plastic finite element method. The calculated shape of the slab edged, separating force and rolling torque are shown to be in good agr

Analysis of the forming process of sinte

Analysis of the forming process of sintered powder metals by a rigid-plastic finite-element method

✍ K. Mori; K. Osakada 📂 Article 📅 1987 🏛 Elsevier Science 🌐 English ⚖ 492 KB

Optimisation of spiral forging process d

Optimisation of spiral forging process design for ensuring uniform quality of forged round billet by three-dimensional rigid–plastic finite element analysis

✍ Tamura, K.; Akiyama, M.; Tajima, J. 📂 Article 📅 2005 🏛 Institute of Materials, Minerals and Mining 🌐 English ⚖ 354 KB