𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Analysis of the packing stage in injection molding of disk cavities

✍ Scribed by Tai-Shung Chung; Yoshiaki Ide

Publisher
John Wiley and Sons
Year
1983
Tongue
English
Weight
209 KB
Volume
28
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Effect of packing pressure on refractive
Effect of packing pressure on refractive index variation in injection molding of precision plastic optical lens
✍ Can Yang; Lijuan Su; Chunning Huang; Han-Xiong Huang; Jose M. Castro; Allen Y. Y πŸ“‚ Article πŸ“… 2011 πŸ› John Wiley and Sons 🌐 English βš– 397 KB

## Abstract In this study, refractive index variation in injection‐molded polymethylmethacrylate optical lenses under different levels of packing pressure was evaluated using a Shack–Hartmann wavefront sensor‐based metrology system. The experimental results showed that optical polymer's refractive

Toughness profile in injection-molded po
Toughness profile in injection-molded polypropylene: The effect of the Ξ²-modification
✍ Miroslav Raab; JiΕ™Γ­ Kotek; Josef Baldrian; Wolfgang Grellmann πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 171 KB πŸ‘ 1 views

Fracture toughness characterized by the J-integral method has been evaluated along injection-molded bars of isotactic polypropylene. A significant increase in toughness with decreasing distance from the specimen gate has been observed with maximum steepness of the dependence in the central part of t

Review of research in the determination
Review of research in the determination of process parameters for plastic injection molding
✍ S. L. Mok; C. K. Kwong; W. S. Lau πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 228 KB πŸ‘ 2 views

This article aims to review the research in determining process parameters of injection molding. A number of research works based on various approaches have been performed in the domain of the parameter setting for injection molding. These approaches, including mathematical models, numerical simulat

Flow-induced crystallization in the inje
Flow-induced crystallization in the injection molding of polymers: A thermodynamic approach
✍ Kyuk Hyun Kim; A. I. Isayev; Keehae Kwon πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 299 KB πŸ‘ 2 views

## Abstract The prediction of the crystallinity and microstructure that develop in injection molding is very important for satisfying the required specifications of molded products. A novel approach to the numerical simulation of the skin‐layer thickness and crystallinity in moldings of semicrystal