✦ LIBER ✦

Analysis of shear band instabilities in sintered metals

✍ Scribed by Pia Redanz; Viggo Tvergaard

Publisher: Elsevier Science
Year: 1999
Tongue: English
Weight: 437 KB
Volume: 36
Category: Article
ISSN: 0020-7683
DOI: 10.1016/s0020-7683(98)00163-2

No coin nor oath required. For personal study only.

✦ Synopsis

For structural components made of sintered metals the porosity may be rather high\ and this a}ects conditions for material failure[ A simple model for analysis of shear band development in uniformly strained solids is used here to study the e}ect of rather high initial porosities on the onset of a material instability[ The elastic plastic behaviour of the material is represented by a material model\ which combines the Gurson model\ relevant to rather low porosities\ with the FKM model\ developed for high porosity powder compacts[ Predictions are shown for various levels of initial porosity and for various levels of initial material imper! fections\ considering both plane strain and axisymmetric conditions outside the shear band[ Also a com! parison of localization predictions by the Gurson model\ the FKM model and the combined model is presented[

📜 SIMILAR VOLUMES

An instability index of shear band for p

An instability index of shear band for plasticity in metallic glasses

✍ Z. Han; W.F. Wu; Y. Li; Y.J. Wei; H.J. Gao 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 564 KB

Catastrophic failure along a dominant shear band sets the limit on how much plasticity can be achieved in metallic glasses (MGs) under uniaxial compression. Here we show that this instability process is governed by a single system parameter, called the shear-band instability index (SBI), which is pr

Shear banding and interfacial instabilit

Shear banding and interfacial instability in planar Poiseuille flow

✍ Suzanne M. Fielding; Helen J. Wilson 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 682 KB

Motivated by the need for a theoretical study in a planar geometry that can easily be implemented experimentally, we study the pressure driven Poiseuille flow of a shear banding fluid. After discussing the "basic states" predicted by a one-dimensional calculation that assumes a flat interface betwee

Dislocation mechanics aspects of plastic

Dislocation mechanics aspects of plastic instability and shear banding

✍ R.W. Armstrong; F.J. Zerilli 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 696 KB

On the shear-band direction in metallic

On the shear-band direction in metallic glasses

✍ Y.F. Gao; L. Wang; H. Bei; T.G. Nieh 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 842 KB

This paper shows that it is inappropriate to relate the angle between the loading axis and the shear-band (or fracture) plane in metallic glasses under uniaxial loading conditions to the coefficient of internal friction in the Mohr-Coulomb model. Shear bands in metallic glasses are a result of mater

Multiple shear band formation in metalli

Multiple shear band formation in metallic glasses in composites

✍ Y. Leng; T. H. Courtney 📂 Article 📅 1991 🏛 Springer 🌐 English ⚖ 852 KB

Non-linear analysis of shear band format

Non-linear analysis of shear band formation in sand

✍ Wu, Wei 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 258 KB 👁 1 views

The paper investigates the incipience of shear band with an incrementally non-linear constitutive equation. Necessary conditions for the emergence of shear band are derived. The lower bound solution is obtained by taking the strain rate inside and outside the shear band into consideration. Numerical