✦ LIBER ✦

Analysis of interior acoustic fields using the finite element method and the boundary element method

✍ Scribed by S. Kopuz; N. Lalor

Publisher: Elsevier Science
Year: 1995
Tongue: English
Weight: 890 KB
Volume: 45
Category: Article
ISSN: 0003-682X
DOI: 10.1016/0003-682x(94)00045-w

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

On the efficiency and accuracy of the bo

On the efficiency and accuracy of the boundary element method and the finite element method

✍ Subrata Mukherjee; Mahesh Morjaria 📂 Article 📅 1984 🏛 John Wiley and Sons 🌐 English ⚖ 419 KB 👁 1 views

The efficiency and computational accuracy of the boundary element and finite element methods are compared in this paper. This comparison is carried out by employing different degrees of mesh refinement to solve a specific illustrative problem by the two methods.

Calculation of interior values by the bo

Calculation of interior values by the boundary element method

✍ Paulsen, Keith D. ;Lynch, Daniel R. 📂 Article 📅 1989 🏛 Wiley (John Wiley & Sons) 🌐 English ⚖ 359 KB 👁 1 views

The scaled boundary finite element metho

The scaled boundary finite element method—alias consistent infinitesimal finite element cell method—for diffusion

✍ Chongmin Song; John P. Wolf 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 194 KB 👁 2 views

The scaled boundary ÿnite element method, alias the consistent inÿnitesimal ÿnite element cell method, is developed starting from the di usion equation. Only the boundary of the medium is discretized with surface ÿnite elements yielding a reduction of the spatial dimension by one. No fundamental sol

Flaw identification using the boundary e

Flaw identification using the boundary element method

✍ S. C. Mellings; M. H. Aliabadi 📂 Article 📅 1995 🏛 John Wiley and Sons 🌐 English

## Abstract In this paper a new boundary element formulation is presented for the identification of the location and size of internal flaws in two‐dimensional structures. An introduction to inverse analysis is given, with special reference to methods of flaw identification, along with a brief revie

Stiffness analysis of polymeric composit

Stiffness analysis of polymeric composites using the finite element method

✍ E. Ghassemieh; V. Nassehi 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 598 KB

Geotechnical verifications using the fin

Geotechnical verifications using the finite-element method?

✍ Michael Heibaum; Markus Herten 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 German ⚖ 297 KB

## Abstract Geotechnical design is increasingly carried out by incorporating the finite element method (FEM), supported by increasing PC‐power. It is discussed and explained with the help of an example to what extent this method can be used as to verifications according to European and German stand