𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Analysis of adaptive antenna using electromagnetic band gap structure

✍ Scribed by H. Talleb; D. Lautru; V. Fouad Hanna

Publisher
John Wiley and Sons
Year
2005
Tongue
English
Weight
128 KB
Volume
48
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

This paper presents the analysis of an adaptive antenna that is formed of a dipole antenna above a ground plane in the presence of electromagnetic band gap (EBG) metallic structures. Electromagnetic simulations are performed using the method of moments (MoM) and the obtained results show a good concordance with those that can be determined when using antenna‐array theory. © 2005 Wiley Periodicals, Inc. Microwave Opt Technol Lett 48: 226–229, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.21313

📜 SIMILAR VOLUMES

Improvement of antenna isolation in hand
Improvement of antenna isolation in hand-held devices using miniaturized electromagnetic band-gap structures
✍ Riku Mäkinen; Vesa Pynttäri; Jouko Heikkinen; Markku Kivikoski 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 488 KB

## Abstract Miniaturized electromagnetic band‐gap (EBG) structures suitable for hand‐held devices at 1.575 and 2.4 GHz frequency bands are presented. To miniaturize the structures, a ceramic substrate with relative permittivity of 82 is used to obtain a period of the order of 2.6–3.5 mm. Simulation

Analysis of electromagnetic band-gap wav
Analysis of electromagnetic band-gap waveguide structures using body-of-revolution finite-difference time-domain method
✍ Ming-Sze Tong; Ronan Sauleau; Anthony Rolland; Tae-Gyu Chang 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 344 KB 👁 1 views

## Abstract Study of electromagnetic band‐gap (EBG) structures has become a hot topic in computational electromagnetics. In this article, some EBG structures integrated inside a circular waveguide are studied. They are formed by a series of air‐gaps within a circular dielectric‐filled waveguide. A

Use of electromagnetic band-gap material
Use of electromagnetic band-gap materials for RCS reduction
✍ S. Collardey; A-C. Tarot; P. Pouliguen; K. Mahdjoubi 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 286 KB

## Abstract Most applications of electromagnetic band gap (EBG) concern antenna radiation or electromagnetic filters. In this paper, a metallic EBG structure is designed for stealth applications. We show how this structure allows us to reduce the radar cross section (RCS) of targets. An application

Pattern-reconfigurable quasi-yagi micros
Pattern-reconfigurable quasi-yagi microstrip antenna using a photonic band gap structure
✍ Xue-Song Yang; Bing-Zhong Wang; Yong Zhang 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 71 KB 👁 1 views

## Abstract A pattern‐reconfigurable quasi‐Yagi microstrip antenna is presented. Its main beam in the E‐plane can scan from −66° to +63° in the upper‐half space by using a switch‐controlled photonic band gap (PBG) structure, while maintaining an operating frequency of approximately 9.65 GHz. The an

Analysis of photonic band-gap (PBG) stru
Analysis of photonic band-gap (PBG) structures using the FDTD method
✍ Ming-Sze Tong; Min Cheng; Yilong Lu; Yinchao Chen; Viktor Krozer; Rüdiger Vahldi 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 388 KB

## Abstract In this paper, a number of photonic band‐gap (PBG) structures, which are formed by periodic circuit elements printed on transmission‐line circuits, are studied by using a well‐known numerical method, the finite‐difference time‐domain (FDTD) method. The results validate the band‐stop fil

Prediction of the gap of electromagnetic
Prediction of the gap of electromagnetic band gap structures in a parallel-plate waveguide environment
✍ Shahrooz Shahparnia; Baharak Mohajer-Iravani; Omar M. Ramahi 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 482 KB 👁 1 views

## Abstract In this article the design, fabrication, and testing of several electromagnetic band gap (EBG) structures used to mitigate switching noise in high speed printed circuit boards is presented. Some features of these surfaces are considered as variables and results from different band gap p