✦ LIBER ✦

Analysis and design of full-band matched waveguide bends

✍ Scribed by Mongiardo, M.; Morini, A.; Rozzi, T.

Book ID: 121811680
Publisher: IEEE
Year: 1995
Tongue: English
Weight: 721 KB
Volume: 43
Category: Article
ISSN: 0018-9480
DOI: 10.1109/22.475662

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A Simple Full-Band Matched 180° E Plane

A Simple Full-Band Matched 180° E Plane Waveguide Bend (Letters)

✍ De Ronde, F.C. 📂 Article 📅 1980 🏛 IEEE 🌐 English ⚖ 216 KB

Design of curved waveguides: the matched

Design of curved waveguides: the matched bend

✍ Melloni, Andrea; Monguzzi, Paolo; Costa, Raffaella; Martinelli, Mario 📂 Article 📅 2003 🏛 Optical Society of America 🌐 English ⚖ 375 KB

Analysis and design of simple low-loss w

Analysis and design of simple low-loss wide-angle waveguide bends

✍ Rahim Ghayour; Mohammad Taghi Fathi; Ahmad Naseri Taheri 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 317 KB

Full band waveguide turnstile junction o

Full band waveguide turnstile junction orthomode transducer with phase matched outputs

✍ Juan L. Cano; Abdelwahed Tribak; Roger Hoyland; Angel Mediavilla; Eduardo Artal 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 1021 KB

A >40% bandwidth fully scalable turnstile-based waveguide orthomode transducer having excellent phase performance is described for the WR75 standard rectangular waveguide. Flexible bandwidth tuning is achieved through the use of an interchangeable stepped scattering element. Reduced height waveguide

Computation of full-vector modes for ben

Computation of full-vector modes for bending waveguide using cylindrical perfectly matched layers

✍ Ning-Ning Feng; Gui-Rong Zhou; Chenglin Xu; Wei-Ping Huang 📂 Article 📅 2002 🏛 Optical Society of America 🌐 English ⚖ 145 KB

Design of matched bends in rectangular w

Design of matched bends in rectangular waveguides by finite element method

✍ Coccioli, R. ;Mongiardo, M. ;Pelosi, G. ;Ravanelli, R. 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 921 KB

Waveguide bends of complex geometrical shape frequently occur in microwave systems. To make an accurate prediction of the bend's electrical performances it is useful to employ a general numerical algorithm, such as the finite element method (FEM), which is able to cope with complex geometries. Howev