✦ LIBER ✦

Analysis and design of cavity-coupled microstrip couplers and transitions

✍ Scribed by Pozar, D.M.

Book ID: 114659780
Publisher: IEEE
Year: 2003
Tongue: English
Weight: 834 KB
Volume: 51
Category: Article
ISSN: 0018-9480
DOI: 10.1109/tmtt.2003.808702

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Analysis and design of slot-coupled dire

Analysis and design of slot-coupled directional couplers between double-sided substrate microstrip lines

✍ Wong, M.-F.; Hanna, V.F.; Picon, O.; Baudrand, H. 📂 Article 📅 1991 🏛 IEEE 🌐 English ⚖ 506 KB

Analysis of slot-coupled transitions fro

Analysis of slot-coupled transitions from microstrip-to-microstrip and microstrip-to-waveguides

✍ Omar, A.A.; Dib, N.I. 📂 Article 📅 1997 🏛 IEEE 🌐 English ⚖ 221 KB

Analysis and design of profiled multiape

Analysis and design of profiled multiaperture stripline-to-microstrip couplers

✍ Rambabu, K.; Bornemann, J. 📂 Article 📅 2003 🏛 The Institution of Electrical Engineers 🌐 English ⚖ 293 KB

Analysis and design of microstrip-to-wav

Analysis and design of microstrip-to-waveguide transitions

✍ Hui-Wen Yao, ; Abdelmonem, A.; Ji-Fuh Liang, ; Zaki, K.A. 📂 Article 📅 1994 🏛 IEEE 🌐 English ⚖ 835 KB

Design method of coupled-microstrip dire

Design method of coupled-microstrip directional couplers based on equivalent admittance approach

✍ Takao Fujii; Tadashi Kawai; Isao Ohta; Yoshihiro Kokubo 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 530 KB

In a coupled-line quarter-wave directional coupler consisting of inhomogeneous waveguides such as microstrip lines, directivity is degraded due to the difference in the phase velocity of the even and odd modes. In order to rectify this problem, various methods have been proposed. In the present pape

Design and analysis of an ultrawideband

Design and analysis of an ultrawideband three-section microstrip-slot coupler

✍ Norhudah Seman; Marek E. Bialkowski 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 469 KB

## Abstract This article presents the design of a three‐section microstrip‐slot coupler aimed for operation in the frequency band between 3.1 and 10.6 GHz. The coupler's design is accomplished in a two‐layer dielectric substrate and consists of rectangular sections of microstrip lines that are broa