𝔖 Bobbio Scriptorium
✦   LIBER   ✦

An investigation of the effect of the basic parameters of the gas-distributing device and other variable quantities on the quality of a fluidized bed

✍ Scribed by M. S. Yufa


Publisher
Springer
Year
1965
Tongue
English
Weight
456 KB
Volume
1
Category
Article
ISSN
0009-2355

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Effect of injection-nozzle operating par
✍ Federica Portoghese; Lorenzo Ferrante; Franco Berruti; Cedric Briens; Edward Cha πŸ“‚ Article πŸ“… 2008 πŸ› Elsevier Science 🌐 English βš– 646 KB

The objective of the present study was to provide insight into the effect of operating conditions on the performance of gas-assisted nozzles injecting liquid into gas-solid fluidized beds. Acquisition of such knowledge is relevant to many industrial applications where liquid injections into fluidize

Influence of pressure and fluidization v
✍ P.A. Olowson; A.E. Almstedt πŸ“‚ Article πŸ“… 1990 πŸ› Elsevier Science 🌐 English βš– 872 KB

## Measurements of the visible bubble flow rate and the through-flow velocity of gas inside bubbles were made in a pressurized fluid&d bed, using capacitance and Pitot-static pressure probes, respectively. The influence of pressure and fluidiition velocity on the bubble behaviour and gas Row distr

An investigation of the effect of the qu
✍ M. W. Billinghurst; S. Rempel; B. A. Westendorf πŸ“‚ Article πŸ“… 1981 πŸ› John Wiley and Sons 🌐 French βš– 458 KB

## Abstract The importance of maintaining a low ratio of stannous ion to albumin molecules in order to obtain a high quality technetium‐99m labelled albumin is demonstrated. It is further shown that the direct preparation of technetium‐99m albumin by reduction of the technetium‐99mm pertechnetate w

The effect of fine material on the struc
✍ G.C. Gardner πŸ“‚ Article πŸ“… 1957 πŸ› Elsevier Science 🌐 English βš– 989 KB

K xperhmmta were performed in which mixturw of up to 28 volume per cent of emalleizedmaterialinlargeai?;edmaterial--iiom8to6timeclthesizeoftbesmall~~w~ chargedagainstanupri&ggas&eamtoformabed. Measurem enta of the pressure drop and bed bulk density were taken at completion of charging and with the a