✦ LIBER ✦

An investigation of deformation behavior and bonding strength of bimetal strip during rolling

✍ Scribed by Danesh Manesh; Karimi Taheri

Publisher: Elsevier Science
Year: 2005
Tongue: English
Weight: 416 KB
Volume: 37
Category: Article
ISSN: 0167-6636
DOI: 10.1016/j.mechmat.2004.04.004

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

An integrated FE process model for preci

An integrated FE process model for precision analysis of thermo-mechanical behaviors of rolls and strip in hot strip rolling

✍ S.M. Hwang; C.G. Sun; S.R. Ryoo; W.J. Kwak 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 326 KB

A finite element (FE)-based approach is presented for the precision analysis of the thermo-mechanical behavior of the rolls and strip in hot strip rolling. Basic FE models for the analysis of the thermal behavior as well as those for the analysis of the mechanical behavior of each object--roll or st

Effect of friction, annealing conditions

Effect of friction, annealing conditions and hardness on the bond strength of Al/Al strips produced by cold roll bonding process

✍ Roohollah Jamaati; Mohammad Reza Toroghinejad 📂 Article 📅 2010 🏛 Elsevier Science ⚖ 734 KB

Influence of friction and geometry of de

Influence of friction and geometry of deformation on texture inhomogeneities during rolling of Cu single crystals as an example

✍ H.O. Asbeck; H. Mecking 📂 Article 📅 1978 🏛 Elsevier Science ⚖ 773 KB

On the deformation behaviour of strip fo

On the deformation behaviour of strip footings during the construction process of an adjacent diaphragm wall in soft clayey ground

✍ René Schäfer; Theodor Triantafyllidis 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 German ⚖ 294 KB

## Abstract The installation process of diaphragm walls in soft clayey soil deposits can produce considerable deformations on the adjacent ground, affecting the serviceability of nearby structures. This article highlights the influence of the stepwise D‐wall construction process on the development

Finite element analysis for deformation

Finite element analysis for deformation behavior of an aluminum alloy composite containing SiC particles and porosities during ECAP

✍ S.C. Lee; S.Y. Ha; K.T. Kim; S.M. Hwang; L.M. Huh; H.S. Chung 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 210 KB

Strain-softening behavior of an Fe–6.5&#

Strain-softening behavior of an Fe–6.5 wt%Si alloy during warm deformation and its applications

✍ Huadong Fu; Zhihao Zhang; Qiang Yang; Jianxin Xie 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 687 KB

An Fe-6.5 wt%Si alloy with columnar grains was compressed at a temperature below its recrystallization temperature. The Vickers hardness and structure of the alloy before and after deformation were investigated. The results showed that with an increase in the degree of deformation, Vickers hardness