An explosive subsoiler was envisaged and designed to achieve greater soil rupture volume and longer sustainability of drainage for the improvement of meadow soil. In this paper, the results are presented from soil bin experiments with the explosive subsoiler, that were conducted in Japan prior to "e
An Explosive Subsoiler for the Improvement of Meadow Soil, Part 1: Thermodynamics
β Scribed by H. Zhang; K. Araya; M. Kudoh; C. Zhang; H. Jia; F. Liu; T. Sawai; S. Yang
- Book ID
- 102575221
- Publisher
- Elsevier Science
- Year
- 2000
- Tongue
- English
- Weight
- 238 KB
- Volume
- 75
- Category
- Article
- ISSN
- 0021-8634
No coin nor oath required. For personal study only.
β¦ Synopsis
The objective of this work was to develop a special subsoiler which would break down the impermeable horizons of meadow soil by using gas pressure explosions produced by injecting a fuel and air mixture. A major part of the soil volume would fail to withstand the gas pressure, and longer sustainability would be obtained. In this paper, an explosive subsoiler was envisaged and designed, and the gas pressure and temperature produced in an explosive gas producer were theoretically analysed.
The results showed that the maximum temperature and pressure predicted in the combustion chamber was 3307 K and 16 MPa, respectively. These values decreased to 2607 K and 5)5 MPa when the engine crank angle was #253 where the explosive gas could be taken from the combustion chamber and be utilized. These values also decreased steeply at larger dead volumes of the subsoiler body.
The predicted temperature and pressure varied from 498 to 1780 K and from 0)4 to 1)5 MPa, respectively, with the range of the fuel injection.
π SIMILAR VOLUMES
An explosive subsoiler was envisaged for the achievement of greater soil rupture volume and longer sustainability of drainage to improve meadow soil. A prototype explosive subsoiler was designed and built in Japan and sent to China, and actual "eld tests were conducted in a meadow soil "eld. This pa
Meadow soil in China consists of extremely "ne soil particles, is quite impermeable and has particular mechanical properties. This paper deals with the mechanical properties of the three horizons (Ap, A and Cg1) of meadow soil as an aid to understanding the draught requirement of a three-stage soil
The objective of this work was to develop a special machine, a three-stage soil layer mixing plough which would achieve longer sustainability of drainage for the improvement of meadow soil. In this paper, the results are presented from soil bin experiments with the three-stage soil layer mixing plou
A prototype three-stage soil layer mixing plough was designed and built in Japan, based on the results of the soil bin experiments conducted using a half-size model ploughs described in Part 2 of this paper. This machine was transported to China for "eld tests and this paper presents the trash mixin