✦ LIBER ✦

An experimental study of the evaporation of gasoline and diesel droplets on hot surfaces

✍ Scribed by M. Abu-Zaid

Publisher: Elsevier Science
Year: 1994
Tongue: English
Weight: 334 KB
Volume: 21
Category: Article
ISSN: 0735-1933
DOI: 10.1016/0735-1933(94)90029-9

No coin nor oath required. For personal study only.

✦ Synopsis

This paper presents the evaporation times of gasoline and diesel droplets settled on smooth surfaces of aluminum, stainless-steel, carbon-steel, ceramic MgO, and kaolin. Measurements of the total evaporation times of a 3.4mg gasoline droplet at surfaces temperatures ranging from 60 to 400°C, and a 5.1mg diesel droplet at surfaces temperatures ranging from 130 to 500°C are reported. Results show that the evaporation times of the droplets on the porous materials (MgO and Kaolin) were lower than on the metalic materials at the same surface temperature.The temperatures at minimum evaporation time for the surfaces tested were determined. It was found that this temperature is inversly dependent on thermal diffusivity.

📜 SIMILAR VOLUMES

Experimental studies on the dynamics and

Experimental studies on the dynamics and evaporation of tandem liquid droplets in a hot gas flow

✍ K.J. Choi; H.J. Lee 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 973 KB

Evaporation of an oil-in-water type emul

Evaporation of an oil-in-water type emulsion droplet on a hot surface

✍ Takeo Takashima; Hiroshi Shiota 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 807 KB

Evaporation characteristics of an Oil-in-Water (O/W) emulsion droplet were examined experimentally. The evaporation time per unit of initial surface area of a droplet τ \* was used to estimate the evaporation characteristics of droplets with different diameters and to compare a water droplet and an

Evaporation and ignition of a fuel dropl

Evaporation and ignition of a fuel droplet on a hot surface (Part 4, model of evaporation and ignition)

✍ Masahiko Mizomoto; Shigeru Ikai; Akio Morita 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 553 KB

In order to clarify the relation between the evaporation process and the ignition mechanism of a fuel droplet (approximately 2 mm in diameter) on a hot surface, the mass of fuel (n-cetane) evaporated in an arbitrary short duration soon after the droplet comes into contact with the hot plate surface

An experimental study of the surface che

An experimental study of the surface chemistry and evaporation kinetics of liquid sodium

✍ Christopher H. Becker 📂 Article 📅 1983 🏛 Elsevier Science ⚖ 307 KB

Experimental study on spreading and evap

Experimental study on spreading and evaporation of inkjet printed pico-liter droplet on a heated substrate

✍ Taewoong Lim; Sewoon Han; Jaewon Chung; Jin Taek Chung; Seunghwan Ko; Costas P. 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 557 KB

In this work, the spreading and evaporation of 2-70 pL droplet (17-50 lm diameter) of water and ethylene glycol jetted by drop-on-demand piezo-driven jetting head on the heated substrate are studied. According to the experimental results, the interfacial oscillation phenomena of water droplet whose

An experimental and theoretical study of

An experimental and theoretical study of autoignition on a horizontal hot pipe

✍ A.J. Harrison; R.M. Furzeland; R. Summers; L.R. Cairnie 📂 Article 📅 1988 🏛 Elsevier Science 🌐 English ⚖ 607 KB

A mathematical model has been formulated which describes the initiation of acetaldehyde cool flames in the free convection boundary layer adjacent to a horizontal hot pipe. The model accurately predicts the experimentally determined boundary layer temperature profiles in the case of nonreacting flow