𝔖 Bobbio Scriptorium
✦   LIBER   ✦

An experimental study of temperature and rate profiles in a rapidly fouling catalyst bed

✍ Scribed by P.G. Menon; R. Sreeramamurthy; P.S. Murti

Publisher
Elsevier Science
Year
1972
Tongue
English
Weight
308 KB
Volume
27
Category
Article
ISSN
0009-2509

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Experimental and Theoretical Investigati
Experimental and Theoretical Investigation of Concentration and Temperature Profiles in a Narrow Packed Bed Adsorber
✍ K. Salem; W. Kwapinski; E. Tsotsas; D. Mewes πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 English βš– 344 KB

Significant radial profiles of concentration and temperature may exist in packed bed adsorbers, leading to a different breakthrough behavior at the wall than in the core of the bed. Respective data have been gained by near-infrared tomography for zeolite and water in relatively narrow tubes, and are

An experimental investigation of burning
An experimental investigation of burning rate and mass transfer in a turbulent fluidized bed
✍ P. Basu; D. Subbarao πŸ“‚ Article πŸ“… 1986 πŸ› Elsevier Science 🌐 English βš– 558 KB

Burning rates of carbon spheres are measured in a 102 mm diameter bed fluidized in the turbulent regime. Results suggest carbon burns much faster than in a bubbling fluidized bed operating under otherwise similar conditions-excepting velocity. The enhanced burning rate is attributed to high mass tra

Estimation of the drying rate and moistu
Estimation of the drying rate and moisture profiles in an industrial spray dryer by means of experimental investigations and a simulation study
✍ Dr.-Ing. Georg Fieg; Prof. Dr.-Ing. GΓΌnter Wozny; Dipl.-Ing. Kurt Buick; Dr. phi πŸ“‚ Article πŸ“… 1994 πŸ› John Wiley and Sons 🌐 English βš– 561 KB

A spray dryer simulation program is described. It is based on the known conservation laws and permits determination of temperature and moisture profiles and droplet trajectories inside spray dryers. An industrial spray dryer used in the manufacture of detergents serves as an example to demonstrate t