An experimental study of heat transfer enhancement with a pulsating flow
β Scribed by Zheng Jun; Zeng Danling; Wang Ping; Gao Hong
- Publisher
- John Wiley and Sons
- Year
- 2004
- Tongue
- English
- Weight
- 415 KB
- Volume
- 33
- Category
- Article
- ISSN
- 1099-2871
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
A pulsating flow in a pipe was experimentally investigated to determine the effect of pulsation on the rate of heat transfer. The influence of hydrodynamic parameters and characteristics of the pulsation on heat transfer was carefully studied. In order to adjust the pulsating parameters, a selfβoscillator was designed so the length of the resonator and the length of the outlet nozzle could be adjusted. The results show that the heat transfer rate is strongly affected by both the hydrodynamic parameters and the configuration of the resonator. With the increase of the flow rate of the liquid and the length of the chamber, heat transfer is enhanced. There is an optimal length at which the heat transfer enhancement attends to the best. Β© 2004 Wiley Periodicals, Inc. Heat Trans Asian Res, 33(5): 279β286, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/htj.20020
π SIMILAR VOLUMES
An experimental study was performed on heat transfer of an open thermosyphon with constant wall heat flux. Water and aqueous glycerin were used as working fluids. The experimental range of modified Rayleigh number was 1 u 10 3 < Ra m < 3 u 10 5 . The average and local heat transfer coefficients, ver
Enhancement of condensation heat transfer using a nonuniform electric field was experimentally investigated for horizontal smooth and low-finned tubes. In the experiments, a wire electrode parallel to the tube was placed beneath the tube. The experimental parameters were the distance and voltage bet
## Abstract The problem of cooling electronic components has become a subject of special interest in recent years due to the increasing capacity and rapidly decreasing size of electronic components. Direct contact cooling using multiple jet impingement is considered the most effective method. The h
## Abstract The influence of heat transfer on the steady flow of a fourthβgrade fluid between two stationary parallel porous plates is studied. The flow is engendered under the application of a constant pressure gradient. The concept of homotopy analysis method is utilized for the series solution o