𝔖 Bobbio Scriptorium
✦   LIBER   ✦

An experimental investigation of nonlinear vibration and frequency response analysis of cantilever viscoelastic beams

✍ Scribed by S. Nima Mahmoodi; Nader Jalili; Siamak E. Khadem


Publisher
Elsevier Science
Year
2008
Tongue
English
Weight
831 KB
Volume
311
Category
Article
ISSN
0022-460X

No coin nor oath required. For personal study only.

✦ Synopsis


The nonlinear vibration analysis of a directly excited cantilever beam modeled as an inextensible viscoelastic Euler-Bernoulli beam has been studied by the authors and is reported in the literature. The viscoelastic damping was modeled as Kelvin-Voigt damping, and the nonlinearities arisen from the inextensibility assumption. This paper extends our theoretical developments presented in the previous papers and utilizes the method of multiple scales in order to arrive at the modulation equations and the closed-form frequency response function. The analytically derived frequency response is experimentally verified through harmonic force excitation of samples of carbon nanotube-reinforced beams. The beam used in experiment consists of two elastic layers of high-carbon steel sandwiched together through a viscoelastic layer of carbon nanotube-epoxy mixture. The results demonstrate that increasing the excitation amplitude or decreasing damping ratio can cause a minor decrease in the nonlinear resonance frequency despite the significant increase in the amplitude of vibration due to reduced damping.


πŸ“œ SIMILAR VOLUMES


Free vibration and lateral buckling of a
✍ Celalettin Karaagac; Hasan Γ–ztΓΌrk; Mustafa Sabuncu πŸ“‚ Article πŸ“… 2009 πŸ› Elsevier Science 🌐 English βš– 436 KB

The effects of crack ratios and positions on the fundamental frequencies and buckling loads of slender cantilever Euler beams with a single-edge crack are investigated both experimentally and numerically using the finite element method, based on energy approach. The governing matrix equations are de

Detection, localization, and sizing of a
✍ M. Karthikeyan; R. Tiwari πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier Science 🌐 English βš– 678 KB

An experimental investigation has been carried out to establish an identification procedure for the detection, localization, and sizing of a flaw in a beam based on forced response measurements. The experimental setup consisted of a circular beam, which was supported by rolling bearings at both ends