𝔖 Bobbio Scriptorium
✦   LIBER   ✦

An evaluation of steady state creep mechanism in an Al-Mg/26 Al2O3f composite

✍ Scribed by R.S. Mishra; A.B. Pandey; A.K. Mukherjee

Publisher
Elsevier Science
Year
1995
Tongue
English
Weight
596 KB
Volume
201
Category
Article
ISSN
0921-5093

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Influence of Ni–P coating on fatigue lif
Influence of Ni–P coating on fatigue life of an Al2O3f/Al composite wire
✍ Wenlong Zhang; Dongyan Ding; Mingyuan Gu πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier Science 🌐 English βš– 518 KB

An Al 2 O 3f /Al composite wire was Ni-P coated by means of an electroless plating route. Fatigue life and residual properties of the coated and uncoated composite wires were investigated. It was found that the fatigue life, residual strength and residual modulus of the composite wire could be impro

Mechanical behavior of a 6061 Al alloy a
Mechanical behavior of a 6061 Al alloy and an Al2O3/6061 Al composite after equal-channel angular processing
✍ L.J. Chen; C.Y. Ma; G.M. Stoica; P.K. Liaw; C. Xu; T.G. Langdon πŸ“‚ Article πŸ“… 2005 πŸ› Elsevier Science 🌐 English βš– 175 KB

The tensile properties and stress-controlled fatigue behavior of an unreinforced 6061 Al alloy and an Al 2 O 3 /6061 Al composite were investigated at room temperature after processing by equal-channel angular pressing (ECAP) for eight passes at a temperature of 260 β€’ C. The results show the tensile

In situ processing and aging behaviour o
In situ processing and aging behaviour of an aluminium/Al2O3 composite
✍ G.H. Zahid; T. Azhar; M. Musaddiq; S.S. Rizvi; M. Ashraf; N. Hussain; M. Iqbal πŸ“‚ Article πŸ“… 2011 πŸ› Elsevier Science βš– 936 KB

Reactive sintering involving a displacement reaction between aluminium and CuO powders was applied to fabricate an aluminium based composite. The two powders were mixed in a ball mill and uniaxially pressed before sintering in nitrogen atmosphere at 900 Β°C. During sintering a displacement reaction b